Need help?Do you have a question about the Bermuda BREEZE Series and is the answer not in the manual?
General| Brand | Bermuda |
|---|---|
| Model | BREEZE Series |
| Category | Water Pump |
| Language | English |
Keep out of reach of children, use drip loops, RCDs, and avoid wet hands.
Designed for outdoor use, not submerged. Do not carry by cable.
Hard-wire via RCD (30mA max) to earth. Follow wire colour code: Earth (E), Neutral (N), Live (L).
Permanently connected cable. Keep connections dry; pump is for outdoor use, not submerged.
Place pump above water level to prevent back siphoning. Ensure a firm, level surface.
Connect tube to outlet, divider valve, and air stones. Ensure valves are fully open before starting.
Adjust output by removing lines or closing valves. Fine-tune individual stones for desired output.
Clean air stones/hoses regularly. Replace stones every 12 months. Keep filter sponge clean.
Open unused valve outlets to bleed airflow, reducing noise and back pressure.
Check pump level, tubing kinks, air stones, and filter. Adjust output if too powerful.
Verify power supply, check fuses/wiring, ensure air outlet valves are open, clean filter.
One-year warranty against defects. Excludes improper use, negligence, and wear parts.
Liability limited to replacement. Tampering or misuse voids warranty. Proof of purchase required.
To Next Page
