40
Mute the hearing aid (optional)
Use the mute function if you need to silence the
hearing aid while wearing it.
Important notice
Do not use the mute function as an off switch,
as the hearing aids are still using battery power
in this mode.
Apply a very long press
(4 seconds) to either end of
the button to mute the
hearing aid.
To reactivate, push the
button briefl y.
Your hearing aid can be muted by using one of the
following optional devices:
· Bernafon EasyControl-A app
· SoundClip-A
· RC-A remote control
41
Quick reset and pairing mode
If you wish to return to the standard settings of the
hearing aid programmed by your hearing care
professional, simply open and then close the battery
drawer. A jingle is played when you reset the
hearing aid.
To pair your hearing aid with a wireless accessory,
your hearing aid must be put into pairing mode.
This can be done by opening and closing the battery
drawer. The hearing aid will remain in pairing mode
for 180 seconds. All compatible accessories are listed
in chapter “Wireless accessories”.
Open Close
To Next Page
Loading...
Need help?
General
