5.5 CONFIGURATION BY PROGRAMMING
5.5.1
Flowchart
The main menu of the flowchart proposes 4 entries:
- Set Position
: Allows doing the set-up on valve
- Set Configuration
: Allows doing the setting of the local command, the safety
position in case of loss of 4/20 mA signal, color of the light ‘valve opened’ and ‘valve closed’
- Read Configuration
: Allows reading the configuration local command, voltage,
closing direction.
- Read Error
: Allows reading the ‘alarm’ codes if present (several codes may appear
simultaneously)
OR OR
OR
OR
OR
OR
OR
See Chapter 5.3
To Next Page
Loading...
