For power supply to 12V vehicle products or 12V electronics
1. Plug the optional switch cable to 12V 10A output port.
2. Connect the optional switch cable and 12V vehicle product or 12V electronics.
3. Press the switch button to power supply.
LED flash light
Press the switch 3 seconds to start the LED flash light.
There are 4 modes of LED light appear in order (normal. strobe. SOS. off) if you press slightly.
E. FAQ：
Q. How to turn off this appliance?
A. This appliance will power off automatically when no load or charging is complete
Q. Need how long time to full charge the E-Power?
A. Approx. 8 hours through the 14V1A input.
Q. How many times can this appliance charge for my cell phone?
A. Depend on the battery capacity of your cell phone. Take iPhone4 as an example, can full
charging 14 times.
To Next Page
Loading...