To Next PageTo Next Page
Need help?Do you have a question about the Berner 242639 and is the answer not in the manual?
Location of the jump start socket for connecting cables.
Port for charging devices with 5V/2A output.
Port for charging devices with 5V/1A output.
Integrated LED flashlight for illumination.
Port for charging the booster itself.
Visual indicator for booster status and charging.
Port for charging laptops with 19V/3.5A output.
Port for powering 12V vehicle products.
Button to control the booster functions.
Accessory for charging the booster via AC power.
Accessory for charging the booster via car's 12V socket.
Cable with clamps for jump-starting vehicles.
Explanation of indicator lights for storage level and status.
Procedure to check the booster's current battery storage level.
Instructions for charging the booster using AC or car adapters.
Step-by-step guide for jump-starting a 12V vehicle.
Details on cable indicator lights during jump-starting.
Instructions for charging mobile devices via USB ports.
Instructions for powering or charging 19V notebooks.
Instructions for using the booster to power 12V products.
How to activate and cycle through LED flashlight modes.
The main booster device.
Cable for connecting to 19V output.
Cable for connecting to 5V USB output.
Various connectors for notebook compatibility.
AC adapter for charging the booster.
Adapter for charging the booster via a car's 12V socket.
The cable used for jump-starting vehicles.
The instruction manual for the product.
Physical size of the booster unit.
The weight of the booster.
Capacity of the internal battery in mAh.
Details on available output ports and their ratings.
Details on the input voltage and amperage for charging.
Time required for a complete charge.
Current delivered for jump-starting vehicles.
Maximum current the booster can deliver.
Recommended ambient temperature range for operation.
Information on how the appliance turns off automatically.
Estimated time to fully charge the booster.
Number of times a cell phone can be charged.
Estimated time to fully charge a cell phone.
Duration the booster can supply power to a notebook.
Number of times a vehicle can be jump-started on a full charge.
Expected normal lifespan of the E-Power.
How long the battery holds charge after full charging.
How long the battery lasts for jump-starting after full charge.
Troubleshooting steps when the device does not respond.
Addressing the issue of the booster becoming hot.
Composition and amount of toxic substances in the E-Power.
Importance of a tight connection for jumper cables.
Checking clamp connectivity and limiting jump start attempts.
Warning against connecting the positive and negative clamps together.
Prohibition of disassembling the main host unit.
Limits on boost time and the need for cable cooling.
General safety guidelines for using the appliance.
Warning regarding supervision for young or infirm persons.
Safety instruction not to use the appliance as a toy.
Warning to keep the appliance away from water and moisture.
Warning against operating in hazardous environments.
Prohibition of modifying or disassembling the booster.
Warning against exposing the appliance to high temperatures.
Recommended storage temperature range.
Recommended ambient temperature for charging.
Instruction to use only the supplied charging equipment.
Guidance on handling potential battery leakage.
Advice on proper disposal of the appliance at end-of-life.
Over discharge due to long periods without charging.
Over discharge from jump-starting vehicles with low battery voltage.
Over discharge from multiple jump starts in a short timeframe.
Details on the warranty duration and conditions for validity.
Conditions that void the warranty.
Disclaimers regarding loss, damage, or consequential damages.
Procedure for submitting and processing warranty claims.
Clarification on warranty coverage for consumable parts.
Ensure the device is fully charged before connecting the cable.
Instruction to plug the OBDII cable into the 12V port.
General