Need help?Do you have a question about the Berner 43345 and is the answer not in the manual?
General| Brand | Berner |
|---|---|
| Model | 43345 |
| Category | Measuring Instruments |
| Language | English |
Safety measures and precautions for using the instrument, including overvoltage categories and general safety rules.
Guidelines for safe and effective operation of the instrument during measurements, including warm-up and handling precautions.
Explanation of symbols used in the manual and on the instrument for warnings and indications.
General instructions for instrument handling, maintenance, and repair, emphasizing qualified personnel and safety.
Procedures for cleaning the instrument case and avoiding water ingress to prevent damage or electrical shock.
Step-by-step guide for replacing the instrument's batteries, including safety precautions before starting.
Overview of the clamp meter's components, including jaws, triggers, keys, and terminals.
Explanation of the digital display indicators and symbols for measurement readings and status.
Detailed description of each key's function, including HOLD, AC/DC, ZERO, and RANGE for operation.
Description of the clamp jaws used for picking up current flowing through a conductor.
Identification and function of the COM and V/Ω terminals for connecting test leads.
Overview of environmental conditions, installation categories, pollution degree, and general operating parameters.
Details on display type, sample rate, conductor size, accuracy, and maximum input values for various measurements.
Specifications for DC current measurement, including ranges, resolution, and accuracy.
Specifications for AC current measurement, including ranges, frequency response, resolution, and accuracy.
Specifications for DC voltage measurement, including ranges, resolution, input impedance, and maximum voltage.
Specifications for AC voltage measurement, including ranges, frequency response, resolution, and maximum voltage.
Specifications for resistance measurement, including range, resolution, open circuit voltage, and overload protection.
Specifications for continuity testing, including range, continuity beeper threshold, and overload protection.
Important safety warnings regarding measurement limits, overheating, and high-voltage conductors.
Step-by-step guide for measuring AC current using the clamp meter, including setup and connection.
Instructions for performing DC current measurements, including jaw demagnetization and zeroing the instrument.
Procedure for measuring DC voltage, including connecting test leads to the appropriate terminals.
Procedure for measuring AC voltage, including connecting test leads to the appropriate terminals.
Steps for measuring resistance, including discharging capacitors and connecting test leads.
Instructions for performing continuity tests, including disabling power and connecting test leads.
To Next Page
