Need help?Do you have a question about the Berner BLM 80 and is the answer not in the manual?
General| Laser Type | 635 nm, <1 mW |
|---|---|
| Units of Measurement | m, in, ft |
| Protection Class | IP 54 |
| Measuring Range | 0.05m - 80m |
| Accuracy | ±1.5mm |
| Laser Class | Class 2 |
| Power Supply | 2 x AAA batteries |
| Resolution | 0.001m |
| Operating Temperature | 0°C - 40°C |
The tool's primary purpose for measuring distances, lengths, heights, grades, and calculating areas/volumes.
Detailed specifications including measuring ranges, accuracy, operating conditions, and components.
Instructions for safely charging the lithium-ion battery using the provided charger.
Guidance on first-time use, including switching on/off and laser beam safety.
Procedures for turning the measuring tool on and off, and auto-off functions.
Step-by-step guide for taking measurements, including laser activation and target aiming.
How to choose the measurement reference point (e.g., edges, pin).
Configuration options for tone signals, display illumination, and unit settings.
How to perform basic distance measurements using the tool.
Method for calculating surface area using sequential length and width measurements.
Procedure for calculating volume using length, width, and height measurements.
Real-time measurement tracking by moving the tool relative to the target.
Techniques for measuring distances indirectly when direct measurement is not possible.
How to measure and lock inclination angles using the tool's reference planes.
Using the built-in timer to prevent tool movement during measurements.
Accessing and managing stored measurement results.
Basic guidelines for handling, measurement conditions, and tool maintenance.
Factors affecting range and result accuracy, like surface type and environment.
Using accessories for stability and improved grade measurement accuracy.
To Next Page
