16
E N G L I S H
HAMMERDRILL BHD-3
Congratulations!
You have chosen a Berner tool. Years of experience,
thorough product development and innovation make
Berner one of the most reliable partners for professional
power tool users.
Technical Data
BHD-3
Voltage V 230
(U.K. & Ireland only) V 230/115
Type 1
Power input W 800
No-load speed min
-1
0–1,150
Load speed min
-1
0–830
Impact energy
Hammerdrilling J 0–3.1
Chiselling J 0–3.4
Maximum drilling range
in steel/wood/concrete mm 13/30/26
Chisel positions 51
Core drilling capacity in soft brick mm 65
Tool holder SDS Plus
®
Collar diameter mm 54
Weight kg 3.4
L
pA
(sound pressure) dB(A) 85.4
K
PA
(sound pressure uncertainty) dB(A) 3.3
L
WA
(sound power) dB(A) 99.4
K
WA
(sound power uncertainty) dB(A) 3.3
Vibration total values (triax vector sum) determined
according to EN 60745:
Drilling into metal
Vibration emissioni value a
h,D
= m/s
2
< 2.5
Uncertainty K = m/s
2
1.5
Drilling into concrete
Vibration emissioni value a
h,HD
= m/s
2
10.5
Uncertainty K = m/s
2
1.5
Chiselling
Vibration emissioni value a
h,Cheq
= m/s
2
10.5
Uncertainty K = m/s
2
3.5
Screwdriving without impact
Vibration emission value a
h
= m/s
2
< 2.5
Uncertainty K = m/s
2
1.5
The vibration emission level given in this information
sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used
to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration emission
level represents the main applications of the
tool. However if the tool is used for different
applications, with different accessories or
poorly maintained, the vibration emission
may differ. This may signifi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to
vibration should also take into account the
times when the tool is switched off or when it
is running but not actually doing the job. This
may signifi cantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories,
keep the hands warm, organisation of work
patterns.
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
Defi nitions: Safety Guidelines
The defi nitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fi re.
To Next Page
Loading...
