EasyManua.ls Logo

Berner Multi HV-R

Berner Multi HV-R
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Rotationsmodus
Pressthebutton2andthelaserMultiHV-Rwillchangeintotherotationmode.
Headspeed:Tochangethespeedoftherotatingbeam,pressthebutton2.Speedsof
0rpm,60rpm300rpm&600rpm(max.)canbeobtained.
Whenpressingthebuttons,thedevicecanbeoutof
levelbecauseofthehighaccuracyoftheleveling,
therotorstartsonlyafterthere-levelingoftheunit.
WhenWorkingwithreceiverthehighestrotaryspeedisadvisable.
Directionalscanning
PresstheSpeedkey3untilitisat0r.p.m,thelasermodulewillstopspinning.Press
theKeyDirectionalscanning;thelasermodulewillscandirectionally.Ifpressingthekey
repeatedly,theangleofscanningoflasermodulewillcontinuouslychangeasfollows:
0°-10-°45º-90-°180°-0°.
PresstheKey5Left-spinningortheKey4Right-spinningtochangethedirectionof
scanning.
Whenpressingthebuttons,thedevicecanbeoutof
levelbecauseofthehighaccuracyoftheleveling,
therotorstartsonlyafterthere-levelingoftheunit.
SlopeAdjustment
Usingthearrowkeys,thelaserlinecanbeinclinedmanually.ToentertheManualmode,
presstheManualbutton6.InManualmodeaLEDnexttothebuttonlights.Thelaserline
canbeinclinedintwoaxes.Toturnoffthemanualmode,presstheManualbutton6,the
LEDnexttobutton6switchoff.
!
!

Related product manuals