Berner Multi HV-R

6
OPERATION
Installingtheappliancehorizontallyonastablesurfaceusingtripodthreadedconnection
onatripodatthedesiredheight.
Switch1ON/OFF:Powersthelaserupordown.
Powerindicator:Whenthelightison,theinstrumentison.
Theunitstartsautomaticallyaftertheendofthelevelingwiththerotation.
Iftheunitistobewrong(outsideoftheself-leveling),thelaserandtherotationstopsas-
hing.Thelasermustberealigned.
Pointoperation
Afterturningthelaseronandtheautomaticlevelingisreadytheunitisintherotatingope-
ration.Pressthebutton2andtherotationstopsonthepoint.
Inthismode,thehighestvisibilityisachieved,since,incontrasttothemovingbeam,the
totallaserenergyisconcentratedtoonepoint.
Inverticalmode,thelaserspotcanbeusedforeasyalignmentorparallelalignment.
AutomaticTiltoff
Bypressingthebutton12istheautomatictilt-offactivated.Inshockorchangeinposition
therotationstops,thelaserashesandautomaticallylevelsitselfnotanew.