Bernette 715 - Page 49

MahnteTvance
DisconnKt the machine frgm
ihe el&ctricity supply by remo¬
ving Ihe plug frpm the iTiBirtfi
SQcKol. When cleaning the ma¬
chine- i1 rngsl always be dis¬
connected from (he electricity
supply.
Remove the stitch pJate:
Turn Ihe hanriwtisel urKtil ItK* nesdle
IS felly raised- Open the hinged front
oover and pusti the release layar
upwards. (1)
Cleaning the feed dog:
Remove th* bobbm case (see Page
and USE^ ih«3 brush s.uppl»ed tP
dean the whole area i2|
Cleaning and luhricating the f^ock:
Remove tho bobo n case (see Page
^6) Snap Ihe two hmfc retaining
arms <3} outwards. Remove the hook
r^oe cover (4^ arid the tiook (5) and
dean with a soft doth. Uubhoale af
itie points (B) (1 -2 drops) withsewir^g
machine oil. Turn Ihe handwheol until
the hook race (7^ ■ & in the le-fl position.
Replace the hook (b). Replace the
hook race cover and snap back (he
g<]
two hooh retaining arms. Insarl tlie
babbincasB and bobbin and replace
the stitch plate.
JnrporTanf.'
Fabdc fluff and threads must be re¬
moved regularly. Your machine
should be serviced at regular inter-
vals at one o\ aur sdrvicu agencies.