Bernhard BLADE RITE 1750 - Page 6

6
BLADE RITE 1750 MANUAL
© Bernhard and Company Limited
Note: The mounting system enables a wide range of
movement so that reels of all types and sizes
can be positioned to achieve the desired angle of
relief grind.
3.3 The grinding carriage should now be moved along the guide rails so that the grinding disc
can be adjusted close to the reel blades.
The grinding head can be adjusted up and down by loosening the locking ring [3] and
raising/rotating the head about its rear pivot by turning the adjuster knob [3A].
3. Reel Grinding (Continued)
Fig. 3.2.1
2
1
Fig. 3.2.2
Fig. 3.2.3
3A
3
Fig. 3.3
4
6
5