Bernhard Anglemaster 3000 User Manual

Please read this manual carefully before using the Anglemaster.
This manual should be kept in a safe place so that it can be used for future reference.
User
’
s Guide &
Instruction Manual
ANGLEMASTER
3000
Anglemaster 3000 Bedknife Grinder
AM3000_2007/02/ENG/Membrane Control Panel
ANGLEMASTER • AM3000

Bernhard Anglemaster 3000 Specifications

General

Brand	Bernhard
Model	Anglemaster 3000
Category	Grinder
Language	English

Summary

ANGLEMASTER 3000 User's Guide

Machine Safety Precautions

Machine Installation

Electrical Supply Requirements

Details on power connection, voltage, grounding, and circuit protection for the machine.

Machine Setting Up

Mounting a Bedknife

Step-by-step guide for attaching the bedknife to the machine's mounting brackets.

Universal Brackets Setup

Quadrant Brackets Setup

Grinding Stone Dressing and Replacement

Setting Angles of Cut

Grinding the Top Face

Procedure to grind the top face of the bedknife to the desired angle.

Grinding the Front Face

Procedure to grind the front face of the bedknife for a parallel cut.

Electrical Fault Finding

Troubleshooting Procedure

Component-Specific Faults

Machine Maintenance

Wiring Diagrams

Bedknife Grinding Angle Setup Guide

Mounting and Initial Alignment

Finding 0° and Setting Top Face Angle

Procedure to find the 0° reference and set the top face angle for grinding.

Setting and Grinding Front Face Angle

Steps for setting the front face angle and grinding the bedknife correctly.

User Manual Addendum: Safety Features

Safety Enclosure Interlocks and Service Switch

Explanation of safety enclosure interlocks and the function of the service switch.