Bernhard Anglemaster 3000 - User Manual Addendum: Safety Features; Safety Enclosure Interlocks and Service Switch

Safety enclosure (guard) interlocks and
“service” switch
Express Dual and Anglemaster models
ED3000, ED3000DX, ED5000, AM3000, AM3000DX
Express Dual and Anglemaster machines are now supplied with safety enclosures as
standard. These enclosures are tted with a safety interlock switch so that the safety
enclosure must be in the closed position before the motors can be started. Similarly, the
motors will shut down if the safety enclosure is opened.
The control panel for all Express Dual and Anglemaster models 3000, 3000DX and 5000
will also be tted with a key operated service switch. This provides a manual override
to by-pass the interlock switch for relevant service and maintenance purposes only
and should only be used by suitably qualied personnel. The service key should be
removed from the machine for normal operation. The service key cannot be removed
when the machine is in “service” mode and an adjacent led illuminates to draw attention to
the fact that this mode has been selected.
USER MANUAL ADDENDUM