1.1 Always wear eye protection when operating the machine
1.2 Never leave rags or tools on the machine or wear loose clothing that could become caught
up in the bedknife, grinding stone or shaft.
1.3 Never allow combustible materials to be placed on or around the machine
1.4 Always ensure that all parts of the bedknife being ground are securely xed.
1.5 Never use the machine for any purpose other than that for which it was designed
1.6 If large units are to be ground, ear defenders should ideally be worn.
(The maximum noise, with a heavy cut on a 36” bedknife has been measured at 85
decibels).
1.7 Ensure that all electrical connections are sound and that cables are safely routed.
1.8 NEVER t or use any grinding stone other than those supplied specically for use on the
ANGLEMASTER.
1.9 NEVER t or use a grinding stone that has been dropped or damaged in any other way
1.10 Always mix and use coolant according to the manufacturer’s instructions.
1.11 Never allow coolant to wash over the control box or other electrical parts.
Extreme caution should be used when removing a bedknife from the ANGLEMASTER.
Ideally protective gloves should be worn.
1. Safety
6
ANGLEMASTER • AM3000
© Bernhard and Company Limited
To Next Page
Loading...
