Bernina 900 - Satin Stitch Embroidery Borders; Straight Border with Satin Stitch; Narrow Border with Satin Stitch

Satin Stitch embroidery
Straight border
Narrow
border
Preparation:
Draw border line, underlay with
paper.
1st run:
2nd run:
Sew satin stitch seam.
Remove paper
and
cut
away
surplus
material.
Corner:
Sew
to
the
corner.
Lower
drop
feed control. Sew three stitches using
__ - ___ the hand wheel. Leaving the needle in 1st run:
the
work
at
the
inside
edge,
raise
foot,
turn work. Make a loop with the cord,
lower
foot
and
sew
a
further
three
stit-
Now
completely
cover
the first
satin
ches.
Raise
drop
feed
control
and
conti-
stitch
seam
wfth
a second
Lay
the
work
•:••> •nue
sewing
carefully.
Pull
on
the
loop
under
the
foot
in
such
a
way
that
the
~~~~~~~~~until
the
foot no longer
lies on the cor-
Draw pearl yarn
No. 5 or 8
(according tothfotPaetecrdmsty1py
ner.
To
make
loop
disappear
pull
the
material)
through
the
hole
of
the
em-
thefoPhth
eofdhemostl
In
ends
of
the
cord.
(See
diagram.)
Push
broidery
foot.
Sew
seam
with
satin
intotherighthand
grooveofthefoot
In
corner stitch over the
corner and conti- stitch. Cut surplus material away care edge Mak the corn ine ex way
hue
sewing,
fully.
edge.
Make
the
corner
in the
same
way
nas with the wide border.
2nd run:
Oversew edge with zigzag. At the same
time guide through pearl cord
(No. 8
three- to five-ply) taking care that it nei-
ther slides
over nor under
the edge.
35