Bernina Accessories - Presser Feet for General Sewing; Invisible zipper foot # 35; Cut n sew attachment # 80 with foot # 90; Foot for cut n sew attachment # 90

11
1
2
1 2
3
| Presser feet for general sewing
Gathering foot # 16
The sole does not lie evenly flat on the feed
dog, and therefore feeds the fabric unevenly,
causing the desired gathering. The slot on the
foot enables a flat piece of fabric to be sewn
directly onto the piece being gathered in a single
operation.
The gathering foot is available in a narrow and
a wide version. The latter is for sewing machines
with 9mm stitch width, but may also be used
with 5.5mm machines.
The basting-stitch function lets you create more
pleats on thick fabrics. With all fabrics, higher
thread tension produces narrower pleats.
1 Needle opening
2 Slot
16 002 596 71 00 A narrow
16 002 967 70 00 A (1630) wide
16 008 460 72 00 B C D D1 E F narrow
16 008 879 72 00 E1 F1 G H wide
Ruffler # 86
Although the ruffler looks somewhat complicated,
it’s easy to handle. When inserting this attachment,
take care that the fork arm comes to rest around
the needle screw. The up-and-down movement of
the needle causes the ruffler blade to move in and
out, taking hold of a bit of the fabric each time and
slipping it under the needle.
1 Pleat density adjustment
2 Pleat depth adjustment
3 Ruffler blade
86 001 944 72 00 A (910–1630)
86 001 944 70 01* A (801–900)
86 008 386 73 00 B C D D1 E E1 F F1 G
86 033 550 70 00 H
* While stocks last