To Next PageTo Next Page
Need help?Do you have a question about the Bernina aurora 440 QE and is the answer not in the manual?
General| Maximum Sewing Speed | 900 stitches per minute |
|---|---|
| Adjustable Presser Foot Pressure | Yes |
| Stitch Width | 5.5 mm |
| Stitch Length | 5 mm |
| Free Arm | Yes |
| Memory Function | Yes |
| Speed Control | Yes |
| Start/Stop Button | Yes |
| Quilting Features | Yes |
| LCD Screen | Yes |
| USB Port | No |
| Built-in Designs | No |
| Hook System | CB Hook |
| Type | Electronic |
| Number of Stitches | More than 180 |
| Lighting | Yes |
Instructions to reduce the risk of electric shock while using the sewing machine.
General warnings to prevent burns, fires, electric shocks, and injuries.
Specific care instructions for double insulated products.
Introduction to the machine's accessories.
Overview of the machine's display and controls.
Overview of the machine's sewing capabilities.
Overview of the machine's embroidery capabilities.
Explanation of symbols used throughout the manual for guidance and warnings.
List and description of standard accessories included with the machine.
Details and usage of various presser feet.
Instructions for positioning, attaching, and removing accessory cabinets.
Description of the padded bag for protection and transport.
Details of optional presser feet for specific sewing tasks.
Optional hoops and needle plates for sewing and embroidery.
Optional accessories like lens sets and thread stands.
Identification of machine parts visible from the front.
Identification of machine parts visible from the rear.
Identification of machine parts visible from the side views.
Connecting the mains cable, foot control, and main switch.
How to use the foot control for sewing speed and needle position.
Information about the sewing light and its replacement.
Operation and connection of the knee lifter for hands-free control.
Details on mounting, removing, and using the supplementary table.
Step-by-step guide for threading the upper thread.
Instructions for threading twin and triple needles.
How to use the automatic needle threader.
Information on the thread cutter and needle holder.
Instructions for winding the lower thread onto the bobbin.
Removing, inserting, and cutting the lower thread bobbin case.
Steps for safely removing and inserting the needle.
Instructions for replacing the presser foot.
How to adjust thread tension for optimal stitch formation.
Information on thread types, needle compatibility, and condition.
Guide to selecting the correct needle for various fabrics and stitches.
Description and function of the needle plate and feed dog.
How the feed dog and fabric transport work during sewing.
Adjusting the pressure exerted by the presser foot.
How to balance stitches for different materials and patterns.
Explanation of all indicators and symbols shown on the machine display.
Detailed explanation of various function buttons and their operations.
How to perform reverse sewing temporarily or permanently.
Using functions for pattern end, repeat, and sequence control.
Using the Start/Stop button for sewing and embroidery.
How to input characters and numbers for various functions.
Opening, using, and programming the machine's memory.
How to program and save utility and decorative stitches.
How to program alphabets, numbers, and create text combinations.
Correcting, deleting, and closing memory entries.
Overview and chart of practical utility stitches (1-33).
Overview and chart of decorative stitches (34-60/74-163).
Usage of stitches like zipper, patchwork, hems, and overlock variations.
Information and techniques for quilting stitches.
Explanation of the BSR function and its two operating modes.
How to perform freehand quilting using the BSR system.
Details on using BSR functions like needle stop and beeper.
Step-by-step guide for sewing using the BSR.
How to disable the BSR and close the function.
Important details on buttonhole tension and model-specific settings.
Methods for marking buttonhole positions manually or automatically.
Using reinforcement thread and sewing buttonholes.
How to balance buttonholes for correct shape and stitch formation.
Overview of buttonhole types and their programming.
Step-by-step instructions for sewing standard and keyhole buttonholes.
Using automatic buttonholes and saving them to memory.
Programming standard, elastic, keyhole, and rounded buttonholes.
Sewing round buttonholes and attaching buttons.
Detailed steps for cleaning the needle plate, bobbin holder, and screen.
Instructions on how and where to lubricate the machine.
Explanation of messages for periodic cleaning and service.
Guidance on proper disposal of the product.
Guide to identifying and resolving common sewing and embroidery defects.
Identification of parts of the embroidery module.
Description of standard accessories included for embroidery.
Overview of optional accessories for enhanced embroidery.
Instructions for attaching and using the free-arm embroidery adapter.
Steps for connecting the embroidery module to the sewing machine.
Preparing the machine: presser foot, needle, thread, and tension.
Steps for preparing fabric and hooping it correctly.
Guide to different types of stabilizers and their applications.
Tips on selecting designs, test embroidery, and scaling.
Explanation of fill stitches, outline stitches, and connection stitches.
Information on selecting appropriate threads and needles for embroidery.
PC requirements and details about BERNINA embroidery software.
Steps for starting the software, opening, and preparing designs.
Using EC on PC software for embroidery execution and screen instructions.
Monitoring embroidery progress, duration, and selecting colors.
Understanding PC interface symbols and handling connection errors.
Using functions like reticule, zoom, and positioning embroidery.
Checking hoops, controlling embroidery, and managing color sequences.
Calibrating the hoop and resolving connection issues.
Steps for starting, interrupting, and finishing embroidery.
Instructions for using the Mega-Hoop accessory.
Techniques for moving and positioning hoops and embroidery designs.
Visual reference of all stitches available on the Aurora 430.
Visual reference of all stitches available on the Aurora 440 QE.
Visual reference of all stitches available on the Aurora 450.
