Bernina Artista 200 User Manual

When using an electrical appliance, basic safety
precautions should always be followed, including
the following:
Read all instructions before using this sewing
computer.
When the sewing computer is not in use, it
should be disconnected from the electricity
supply by removing the plug from the outlet.
DANGER
To reduce the risk of electric shock:
1. An appliance should never be left unattended
when plugged in.
2. Always unplug this sewing computer from
the electric outlet immediately after using and
before cleaning.
WARNING
To reduce the risk of burns, fire, electric shock
or injury to persons:
1. Do not allow to be used as a toy. Close
attention is necessary when this sewing
computer is used by or near children and
infirm persons.
2. Use this sewing computer only for its
intended use as described in this manual.
Use only attachments recommended by the
manufacturer as contained in this manual.
1
IMPORTANT SAFETY INSTRUCTIONS
artista 200 – Safety Instructions
3. Never operate this sewing computer if
• it has a damaged cord or plug
• it is not working properly
• it has been dropped or damaged
• it has fallen into water
Return the sewing computer to the nearest
authorized BERNINA dealer or service center
for examination, repair, electrical or mechanical
adjustment.
4. Never operate the sewing computer with any
air openings blocked. Keep ventilation openings
of the sewing computer and foot controller
free from accumulation of lint, dust and loose
cloth.
5. Keep fingers away from all moving parts.
Special care is required around the sewing
needle.
6. Always use the BERNINA original stitch
plate. The wrong plate can cause the needle
to break.
7. Do not use bent needles.
8. Do not pull or push fabric while stitching.
It may deflect the needle, causing it to break.
9. Turn power switch to «0» (off) when making
any adjustments in the needle area, such as
threading or changing the needle, threading
the bobbin or changing the presser foot etc.
10. Always unplug the sewing computer from
the electrical outlet when removing covers,
lubricating or when making any other user
servicing adjustments mentioned in this
instruction manual.
11. Never drop or insert any object into any
opening.
12. Do not use outdoors.
s001-6_e.qxd 19.4.2004 16:07 Uhr Seite 1
030794.71.04_0401_a200_EN

Bernina Artista 200 Specifications

General

USB Connectivity	Yes
Maximum Stitch Width	9 mm
Maximum Stitch Length	5 mm
Needle Positions	11
Display	LCD
Needle Threader	Automatic
Start/Stop Button	Yes
Speed Control	Yes
Upper Thread Sensor	Yes
Lower Thread Sensor	Yes
Lighting	LED
Presser Feet	Multiple included
Embroidery Module	Included
Sewing Speed	900 stitches per minute
Maximum Embroidery Area	155 x 200 mm
Embroidery Designs	Built-in designs + ability to import
Memory	Yes

Summary

Important Safety Instructions

DANGER

Alerts for immediate hazards and risks of electric shock.

WARNING

Alerts for potential risks of burns, fire, electric shock, or injury.

The Sewing Computer

Setting up the Sewing Computer

Instructions for connecting and preparing the sewing computer.

Operating Instructions

Guidance on basic operations, functions, and settings of the sewing computer.

Screen Display

Explanation of the sewing computer's screen interface and its elements.

External Functions

Details on the external buttons and their functionalities on the sewing computer.

On-screen Functions

Description of various on-screen functions and their usage.

The Embroidery Computer

Setting up the Embroidery Computer

Instructions for installing and preparing the embroidery module and computer.

Attaching the Embroidery Module

Step-by-step guide on how to connect the embroidery module to the sewing computer.

General Operating Instructions

Basic procedures for preparing and operating the embroidery computer.

Selecting Embroidery Motifs

Guidance on choosing and accessing embroidery designs from various sources.

Starting to Embroider

Steps for initiating the embroidery process, including hoop attachment and motif selection.

On-screen Functions and Displays

Explanation of the interactive functions and visual elements of the embroidery computer screen.

External Functions

Description of external controls and their functions for embroidery operations.

Important Embroidery Information

In General

General overview of embroidery concepts, including motifs and basic information.

Embroidery Threads

Information on selecting and using different types of embroidery threads.

Embroidery Stabilizers

Details on various types of stabilizers and their application in embroidery.

Hooping the Fabric

Instructions on how to properly hoop fabric for embroidery.

Embroidery

Motifs

Information on embroidering, positioning, altering, and combining motifs.

Alphabets – Lettering

Guide to using alphabets, lettering, and combining text for embroidery.

Adjustments

How to adjust motif colors, stitch density, and pull compensation.

Applications

Guidance on specific embroidery applications like free arm embroidery and lace.

Saving and Deleting Motifs

Saving Motifs

Instructions on how to save embroidery motifs to the computer or design card.

Deleting Saved Motifs

Procedures for deleting individual or all saved embroidery motifs.

Embroidery Support

Thread Breakage While Embroidering

Troubleshooting steps and messages related to thread breakage during embroidery.

Trouble Shooting

Guidance on identifying and resolving common embroidery operation failures.

Messages

List of on-screen messages and required actions for the embroidery computer.

Peripherals and Accessories

Peripherals

Details on external devices like Modems and CD-ROM drives connectable to the system.

Accessories

Information on optional accessories such as suitcase systems and hoops.

Glossary

Balance

Alters stitch or motif to correct distortions.

Modem

Transfers data to the computer via phone network for portal access.

Setup

Determines and adjusts factory settings to personal requirements.

Tutorial

Self-help program for learning sewing and embroidery features.

USB

Universal Serial Bus for connecting peripherals like CD-ROM drives.

Zoom

Focuses on or enlarges/reduces elements on screen.