169Setup Program
Opening Setup Program
press the external Setup button
•
menu appears
touch «Portal Provider Settings»
• the screen «Portal Provider Settings» appears
Portal Provider Settings
• the screen display contains the summary of the set providers
(your provider’s address)
• up to three different providers can be set - selection of
provider may be made by touching the red circle, circle
becomes a
touch the bar of the selected provider or «To Next Page»
Provider 1
• the screen e.g. «Provider 1» appears, the provider settings are
displayed
• the provider settings are made as follows:
select an empty provider space on the screen «Portal Provider
Settings», (e.g. Provider 3)
Provider 3
• the screen «Provider 3» appears
touch the bar «Provider»
Portal Provider Settings
• a screen with a keyboard appears
the necessary information for this bar can be entered
touch «OK»
• the entered information will be saved, the screen display
closes and the screen «Portal Provider 3» appears again
• fill in all bars in this manner
Saving and Closing
touch «OK»
•
changes are saved, the screen closes and the menu appears
Note:
How to establish a connection from the
Modem to a Portal provider see page 185.
Note:
For Modem settings see separate Modem
instruction manual.
s159-170_e 19.4.2004 16:28 Uhr Seite 169
030794.71.04_0401_a200_EN
To Next Page
Loading...
Need help?
General
