Bernina Artista 200 User Manual

69Practical Stitches – Applications
Patching Knits and Jersey
Jersey stitch No. 14
size and type suitable for the
fabric selected
lightweight darning thread
up (sewing position)
Reverse pattern foot No. 1C
Stitch:
Needle:
Thread:
Feed dog:
Presser foot:
TIP
Knits
Use a new needle to prevent damage
of the fabric loops.
TIP
Sewing stretch fabrics
 place a stabilizer under the fabric
 if necessary use a stretch needle (130/705 H-S);
point slides easily between the fibers
 to prevent the stretching of the seam while
being sewn, reduce the presser foot pressure to
suit the fabric
Covering Worn or Damaged Areas
• particularly suitable for knit fabrics, lingerie
Preparation
 do not cut damaged area
 round off the edges of the patch to retain flexibility
 pin and baste to right side
Sewing
 place patch over worn area
 sew over edge
 sew a second row inside the first if required
 cut away damaged area
s035-72_e 19.4.2004 16:12 Uhr Seite 69
030794.71.04_0401_a200_EN

Bernina Artista 200 Specifications

General

USB Connectivity	Yes
Maximum Stitch Width	9 mm
Maximum Stitch Length	5 mm
Needle Positions	11
Display	LCD
Needle Threader	Automatic
Start/Stop Button	Yes
Speed Control	Yes
Upper Thread Sensor	Yes
Lower Thread Sensor	Yes
Lighting	LED
Presser Feet	Multiple included
Embroidery Module	Included
Sewing Speed	900 stitches per minute
Maximum Embroidery Area	155 x 200 mm
Embroidery Designs	Built-in designs + ability to import
Memory	Yes