Bernina Artista 200 User Manual

21
Presser Foot Pressure
Attaching the Presser
Foot
 guide the foot
upwards over the
cone
 press the clamping
lever down
Raising the Lever
 raise the clamping
lever
 remove the presser
foot
Changing the Presser Foot
Changing the Presser
Foot
 raise the needle and
presser foot
 turn power switch
to «0» (off)
Refer to the safety
instructions!
!
Feed Dog
Button on Handwheel Side of Sewing Computer
Button flush with base plate = feed dog up, sewing
position
• for all machine-fed sewing
Button depressed = feed dog lowered, darning position
•
for freehand sewing (darning, freehand embroidery,
freehand quilting)
•
for embroidery (with the embroidery module)
The Sewing Computer – Operating Instructions
Dial on Head Frame
The presser foot pressure
can be set on the left of
the head frame.
Standard Pressure
• for all normal sewing
Reduced Pressure
• for jerseys and loose
knits, quilting
• prevents fabric from
stretching
 adjust pressure so
that the fabric still
feeds correctly
Increased Pressure
• for firm fabrics;
improves fabric feed
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 21
030794.71.04_0401_a200_EN

Bernina Artista 200 Specifications

General

USB Connectivity	Yes
Maximum Stitch Width	9 mm
Maximum Stitch Length	5 mm
Needle Positions	11
Display	LCD
Needle Threader	Automatic
Start/Stop Button	Yes
Speed Control	Yes
Upper Thread Sensor	Yes
Lower Thread Sensor	Yes
Lighting	LED
Presser Feet	Multiple included
Embroidery Module	Included
Sewing Speed	900 stitches per minute
Maximum Embroidery Area	155 x 200 mm
Embroidery Designs	Built-in designs + ability to import
Memory	Yes