Bernina Artista 200 User Manual

60 Practical Stitches – Applications
TIP
Exact sewing
Use guide line on stitch plate or seam guide.
Straight stitch No. 1
double needle
cotton or polyester
up (sewing position)
Reverse pattern foot No. 1C
Hem Finish in Knits
• elastic hems in knits
• no additional overcasting necessary
Preparation
 turn the raw edge under the width desired;
press and baste, if required
 insert double needle into the sewing computer
and thread; threading see page 16
 recall Security Program, select suitable double
needle and stitch plate (appropriate double
needle limitation – e.g. for a double needle of
4mm select double needle button 4.0)
Sewing
 sew on the right side along the seam edge (on
the right side two parallel stitch lines are visible,
on the wrong side a zig-zag stitch is visible)
 trim excessive fabric back to about 2mm from
the stitches
Hems With Double Needle
Stitch:
Needle:
Thread:
Feed dog:
Presser foot:
TIP
Adjusting stitch length
Increase stitch length according to fabric.
TIP
More elastic seam
Use wooly nylon as bobbin thread which results in
a more elastic seam.
s035-72_e 19.4.2004 16:12 Uhr Seite 60
030794.71.04_0401_a200_EN

Bernina Artista 200 Specifications

General

USB Connectivity	Yes
Maximum Stitch Width	9 mm
Maximum Stitch Length	5 mm
Needle Positions	11
Display	LCD
Needle Threader	Automatic
Start/Stop Button	Yes
Speed Control	Yes
Upper Thread Sensor	Yes
Lower Thread Sensor	Yes
Lighting	LED
Presser Feet	Multiple included
Embroidery Module	Included
Sewing Speed	900 stitches per minute
Maximum Embroidery Area	155 x 200 mm
Embroidery Designs	Built-in designs + ability to import
Memory	Yes