Bernina Artista 200 User Manual

152 Personal Program
Altering Stitches
Activating Personal Program
 press the Personal Program button
Personal Program Screen
 select the stitch to be altered (e.g. zig-zag)
 alter stitch width and length with the external
stitch width and stitch length knobs
• the alterations as well as the basic settings are
indicated
 touch the Stitch Altering Area (light blue)
• a special screen appears
 touch the bar «Save Settings» and all alterations
are saved, the special screen closes
Special Screen
• «Save Settings»: all alterations (stitch length and
width, etc.) of the selected stitch are saved
• «Reset Settings»: all alterations of the selected
stitch are reset to basic settings
• «Add to Personal Program»: a selected stitch
(with possible alterations) is saved in the Personal
Program
•
«Remove from Personal Program»: a selected
stitch is deleted from the Personal Program
•
touch «ESC» – the screen closes without anything
being saved
TIP
The possible alterations of the original
stitch setting can also be altered
permanently in each category.
• for more information on Saving Altered Settings Permanently see page 24
•••••••••••••
s149-152_e 19.4.2004 16:26 Uhr Seite 152
030794.71.04_0401_a200_EN

Bernina Artista 200 Specifications

General

USB Connectivity	Yes
Maximum Stitch Width	9 mm
Maximum Stitch Length	5 mm
Needle Positions	11
Display	LCD
Needle Threader	Automatic
Start/Stop Button	Yes
Speed Control	Yes
Upper Thread Sensor	Yes
Lower Thread Sensor	Yes
Lighting	LED
Presser Feet	Multiple included
Embroidery Module	Included
Sewing Speed	900 stitches per minute
Maximum Embroidery Area	155 x 200 mm
Embroidery Designs	Built-in designs + ability to import
Memory	Yes