Bernina bernette 2 - Quilt Stitching

EN
110
15
Set the machine as illustrated.
Turn the stitch width dial and stitch length
dial to suit the fabric.
Set stitch length control "4".
Set stitch width control "3" - "5".
Quilt (1)
Pattern selector on " ".
For all fabrics and all types of work.
Quilt (2)
Pattern selector on " ".
For all fabrics and all types of work.
The bobbin thread must come through the
right side. Depending on the fabric used
increase the upper tension.
Use monolament thread 0 hand stitch
effect.
Balance, adjust if necessary.
Quilt stitch