Bernzomatic TS7000 - User Manual

DO NOT DISCARD THESE WARNINGS AND INSTRUCTIONS | NE PAS JETER CES AVERTISSEMENTS ET INSTRUCTIONS
NO DESECHE ESTAS ADVERTENCIAS E INSTRUCCIONES | NÃO DESCARTE ESTES AVISOS E INSTRUÇÕES
08/19/16
200 Old Wilson Bridge Road | Columbus, OH USA 43085
(866) 928-2657 | worthingtoncylinders.com | bernzomatic.com
INSTRUCTION MANUAL
Trigger-Start Torches
Models: TS4000, TS7000, TS8000, BZ4500HS
 DANGER
ENGLISH | ANGLAIS | INGLÉS | INGLÊS
This torch is used with a flammable product. Failure to
comply with these Warnings and Instructions may result
in an explosion or fire that may cause property damage,
serious personal injury or death.
Read and comply with the instructions and warnings in this
manual and familiarize yourself with the torch before lighting
and using. Review instructions and warnings periodically to
maintain awareness. Do not try to operate before reading
instructions.
Torches are to be used only with hand held gas cylinders
specifically designated for use with torches.
 WARNING
• Keep torch out of reach of children and anyone who has not read instructions. Do not point torch towards face, other
persons or flammable objects. Never attempt to use torch as a cigarette lighter.
• Disconnect cylinder when not in use.
• Never attempt to modify the torch construction and never use unapproved accessories or fuels.
• Treat the torch as you would any fine tool or instrument. Do not drop, throw, or otherwise abuse.
• Do not use a leaking, damaged or malfunctioning torch.
• Always wear safety glasses, protective gloves and use proper tools to handle hot work.
• Radiant energy can harm your eyes. Wear glasses having an appropriate lens shade number (see 29 CFR 1926.102)
for the torch operation being done; brazing and light cutting (3 or 4), medium cutting and light welding (4 or 5), heavy
cutting and medium/heavy welding (5-8).
• Work only in well-ventilated areas. Avoid the fumes from fluxes, lead-based paint, and all metal heating operations. Be
careful to avoid fumes from cadmium plating and galvanized metal- remove these coatings in the area to be heated by
filing or sanding prior to heating.
Materials used in the construction of this device may contain brass (which may contain lead), a chemical known to the
State of California to cause birth defects or other reproductive harm.
Combustion by-products produced when using this device contain chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
ENG
FRA
SPA
POR
DANGER
DANGER
PELIGRO
PERIGO
INCENDIE
INCENDE
INCENDIO
INCÊNDIO
EXPLOSION
EXPLOSION
EXPLOSIÓN
EXPLOSÃO
FUMES
VAPEURS
VAPORES
VAPORES
1
2
1
3
1
4
1
1
1
2
1
3
1
4
1
1
1
2
1
3
1
4
1
2
1
3
1
4
TS4000
TS8000
TS7000
TS4500HS

Summary

General Safety Warnings

Flammable Product Hazards

Torch use with flammable products requires strict adherence to warnings to prevent explosions, fires, and serious injury or death.

Material and Health Warnings

Device materials may contain lead, a chemical known to cause birth defects or reproductive harm in California.

Safe Usage Guidelines

Outdoor and Windy Conditions

Exercise caution outdoors due to bright light and wind, which can affect flame visibility and spread sparks.

Heat Conduction and Burns

Be aware of conducted heat and hot torch tips to prevent burns and accidental heating of unintended materials.

Combustibles and Vehicles

Never use the torch near combustibles, motor vehicles, or gasoline-fired products, and be aware of hidden fuel lines.

Assembly Instructions

Cylinder Connection

Thread the gas cylinder into the regulator/torch body, hand-tightening only. Test connections with soapy water for leaks.

Lighting and Operation

Cylinder Tipping Caution

Avoid tipping the gas cylinder more than 60 degrees to prevent torch flare. Keep torch upright for stability.

Ignition and Flame Adjustment

Unlock the ignition button, point in a safe direction, and pull to ignite. Adjust flame size using the regulating knob.

Flame Lock Feature

Engage the flame lock by pressing the button while the ignition button is depressed for continuous flame.

Storage and Maintenance

Cylinder Removal and Storage

Remove cylinder when not in use, store separately from torch, out of reach of children, and in well-ventilated areas.

Cylinder Temperature Limits

Do not expose cylinders to temperatures exceeding 120°F to ensure safety.

Limited Lifetime Warranty

Warranty Coverage

Product is warranted against defects in material and workmanship for its lifetime for original purchaser.

Making a Claim

Contact Bernzomatic retailer or directly for warranty claims, providing proof of purchase.

Bernzomatic TS7000 Specifications

General

Fuel Type	Propane
Burner Type	Torch
Flame Control	Adjustable
Swirl Flame	Yes
Hose Length	Not applicable
Ignition Type	Piezo ignition