Bernzomatic TS8000 - User Manual

DO NOT DISCARD THESE WARNINGS AND INSTRUCTIONS | NE PAS JETER CES AVERTISSEMENTS ET INSTRUCTIONS
NO DESECHE ESTAS ADVERTENCIAS E INSTRUCCIONES | NÃO DESCARTE ESTES AVISOS E INSTRUÇÕES
08/19/16
200 Old Wilson Bridge Road | Columbus, OH USA 43085
(866) 928-2657 | worthingtoncylinders.com | bernzomatic.com
INSTRUCTION MANUAL
Trigger-Start Torches
Models: TS4000, TS7000, TS8000, BZ4500HS
 DANGER
ENGLISH | ANGLAIS | INGLÉS | INGLÊS
This torch is used with a flammable product. Failure to
comply with these Warnings and Instructions may result
in an explosion or fire that may cause property damage,
serious personal injury or death.
Read and comply with the instructions and warnings in this
manual and familiarize yourself with the torch before lighting
and using. Review instructions and warnings periodically to
maintain awareness. Do not try to operate before reading
instructions.
Torches are to be used only with hand held gas cylinders
specifically designated for use with torches.
 WARNING
• Keep torch out of reach of children and anyone who has not read instructions. Do not point torch towards face, other
persons or flammable objects. Never attempt to use torch as a cigarette lighter.
• Disconnect cylinder when not in use.
• Never attempt to modify the torch construction and never use unapproved accessories or fuels.
• Treat the torch as you would any fine tool or instrument. Do not drop, throw, or otherwise abuse.
• Do not use a leaking, damaged or malfunctioning torch.
• Always wear safety glasses, protective gloves and use proper tools to handle hot work.
• Radiant energy can harm your eyes. Wear glasses having an appropriate lens shade number (see 29 CFR 1926.102)
for the torch operation being done; brazing and light cutting (3 or 4), medium cutting and light welding (4 or 5), heavy
cutting and medium/heavy welding (5-8).
• Work only in well-ventilated areas. Avoid the fumes from fluxes, lead-based paint, and all metal heating operations. Be
careful to avoid fumes from cadmium plating and galvanized metal- remove these coatings in the area to be heated by
filing or sanding prior to heating.
Materials used in the construction of this device may contain brass (which may contain lead), a chemical known to the
State of California to cause birth defects or other reproductive harm.
Combustion by-products produced when using this device contain chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
ENG
FRA
SPA
POR
DANGER
DANGER
PELIGRO
PERIGO
INCENDIE
INCENDE
INCENDIO
INCÊNDIO
EXPLOSION
EXPLOSION
EXPLOSIÓN
EXPLOSÃO
FUMES
VAPEURS
VAPORES
VAPORES
1
2
1
3
1
4
1
1
1
2
1
3
1
4
1
1
1
2
1
3
1
4
1
2
1
3
1
4
TS4000
TS8000
TS7000
TS4500HS

Summary

DANGER and Flammability Warnings

Flammable Product Hazard

Torch use with flammable product risks explosion, fire, property damage, serious injury, or death.

Health and Safety Precautions

California Proposition 65 Disclosure

Device may contain lead; combustion by-products may cause cancer or reproductive harm.

Safe Usage Practices

Keep away from children, do not point at others, disconnect cylinder, avoid modifications, do not abuse.

Protective Gear and Work Environment

Wear safety glasses/gloves, use proper tools, work in ventilated areas, avoid hazardous fumes.

Operational Safety Guidelines

Avoid lead paint stripping, be cautious outdoors, prevent heating adjacent surfaces, beware of hot tips.

Combustibles and Container Safety

Never use near combustibles or vehicles; avoid heating sealed containers and ensure ventilation.

Assembly and Setup

Cylinder Attachment

Attach gas cylinder to regulator/torch body by hand tightening, ensuring proper connection.

Leak Testing

Test connections with soapy water after opening valve (without lighting) in a ventilated area.

Lighting and Operation

Lighting Procedure

Unlock ignition, point safely, pull ignition button, and adjust flame size as needed.

Flame Lock Feature

Engage flame lock by pressing button while ignition is depressed; release by pulling ignition button.

After Use Procedures

Lock ignition, close regulator valve, disconnect cylinder, and release residual gas.

Additional Operational Warnings

Ensure torch is cool before handling, check joints for leaks, and pre-warm cylinder in cold weather.

Storage and Warranty

Cylinder Storage

Lock ignition, close valve, disconnect cylinder, store separately from torch, away from heat and children.

Limited Lifetime Warranty

Product is warranted against defects; repair or replacement is the sole remedy.

Bernzomatic TS8000 Specifications

General

Fuel Type	Propane or MAP-Pro
Flame Type	Swirl
Usage	Brazing, Soldering, Heating
Valve Type	Adjustable
Maximum Flame Temperature	3600°F
Weight	1.3 lbs
Ignition Type	Instant On/Off
Gas Consumption	Approximately 1.5 lbs/hour