avoid strangulation due to Lanyard.
⚫ Connect accessory carefully to avoid the patient being twined or strangulated.
Product Feature
◆ Simple and convenient usage of product, simple one-touch operation.
◆ Small volume, light weight, convenient to carry.
◆ Lower consumption, original two AAA batteries can continuously work for 15 hours.
◆ Low voltage reminder shows in screen when there’s low battery.
◆ The machine will automatically power off after 10 seconds when there’s no signal generated.
◆ Communication can be realized between the product and mobile phone with its wireless
Bluetooth. (Except “BM1000D”)
Display Introduction
Figure 1
Measuring Steps
1. Hold the product in one hand with the front panel facing the palm. Put the other hand’s big
finger on the battery cabinet lid’s press sign as shown in Figure 2, press downwards and push
the lid open at the same time. The battery cabinet is opened.
2. Install batteries into the slots per the “+” and “-” symbols as shown in Figure 3.
Cover the lid onto the cabinet and push it upwards to make it close well.
3. Press Clip’s press sign in the figure 1and open the clip. Let the testee’s finger put into the
rubber cushions of the clip, make sure the finger is in the right position as shown in Figure 4,
and then clip the finger.
4. Press the power and function switch button on the front panel to turn on the product. Using
To Next Page
