Bertazzoni PRO366GASAR - Page 17

17
Replacethenozzleusingtheconversionset
suppliedwiththerangeorbyaBertazzoni
authorizedpartswarehouse.Eachnozzlehasa
numberindicatingitsflowdiameterprintedon
thebody.Consultthetableonpa ge 20for
matchingnozzlestoburners.



Adjusttheprimaryairflowbylooseningthescrew
PandsettingthegapXintheVenturiconeto½”
(5/16”fornaturalgas).



STEP4:BROILERBURNER
Loosenthescrewandpullouttheburnerfromits
support.
ATTENTION:payextraattentiontoavoiddamage
totheigniterandthermocouple.


Using a 7 mm [name of the tool] unscrew the
nozzle. Replace the nozzle using the conversion
set supplied with the range or by  a Bertazzoni
authorized parts warehouse. Each nozzle has a
number indicating its flow diameter printed on
the body. Consult the table on page 20 for
matching
nozzlestoburners.


AdjustthegapXbysettingittofullyopen
position.