Bertram 46 User Manual

Introductory message from the manufacturer.

Advice on checking instruments for damage and proper function.

Operation of engine start/stop switches and emergency shutdown.

Function of toggle switches for lights and accessories.

Using battery switches and understanding various gauges.

Operation and components of the safety alarm system.

Ammeter, fuel, oil pressure, and temperature gauges.

Tachometer, gear oil pressure, and hour meter functions.

Location and function of water level gauges.

Overview of bridge controls, engine gear, and steering.

Explanation of trim tab usage for boat leveling.

Information on engines and Allison marine gears.

Details on propeller shafts, logs, and alignment.

Instructions for installing boat propellers.

Procedures for maintaining the exhaust system.

Effects of efficiency, conditions, and weight on boat speed.

Boat testing procedures and impact of marine growth.

Effects of bilge water and damaged underwater equipment on speed.

Overview of the boat's DC and AC electrical systems.

Details on DC batteries, fuses, and the distribution panel.

Step-by-step instructions for operating the 32 VDC panel.

Practical examples of electrical system operation.

Overview of the AC system and shore line connections.

Polarity lights, auxiliary generator, and circuit breakers.

Operation of AC circuit breakers and transfer switches.

Safety precautions and the boat's bonding system.

Procedures for checking generator mechanical and electrical aspects.

Information on generator controls, relays, and breakers.

Instructions for operating the converter/battery charger.

Operation of converter and the 115 VAC panel.

Information on cold cathode lighting and additional equipment.

Glossary of electrical system terms and symbols.

Details on shore power connections and adapters.

Visual representation of the AC power distribution.

Detailed wiring diagram for the 115 VAC power panel.

Wiring diagram for the air conditioning panel.

Block diagram of the air conditioning system power supply.

Block diagram of the AC air conditioner system distribution.

Details on the 12 KW Onan generator controls.

Wiring layout for the stereo system speakers.

Initial checks and start-up procedures for AC units.

How to adjust and maintain desired room temperature.

Specific steps for operating reverse cycle AC units.

Steps for safely fueling the Bertram yacht.

Fuel system details and priming procedures.

Overview of the boat's fresh water system and tanks.

Water pump operation, priming, and water heater use.

Dockside water supply connection and system winterizing.

Procedures for flushing and pumping out the toilet.

General operating instructions for the Vacu-Flush system.

Cleaning and winter storage of the Vacu-Flush system.

Routine procedures before and during engine start-up.

Guidance on maneuvering and stopping the boat.

Information on optimal cruising speeds and engine RPM.

Procedures for securing the boat when unattended.

Daily checks and periodic maintenance tasks.

Initial and periodic maintenance schedules.

Cleaning and upkeep of the boat's exterior and interior.

Maintenance tasks for the engine compartment.

Procedures for storing the boat in dry conditions.

Procedures for wet storage and preparing for use.

Checks to perform before launching the boat.

Checks after launching, including electrical and engine systems.

Guidance on maintaining the fiberglass hull.

Methods for removing stains and restoring gloss.

Procedures for repairing scratches and abrasions on fiberglass.

Steps for painting fiberglass parts.