54
Setting instructions: Models without date
If packaging clip is on the crown (setting knob), please remove.
Note: Crown may already be in the out position or unscrewed.
Step 1: Turn crown counter clock-wise to unscrew crown (fig. 1).
The crown is completely unscrewed when it turns freely.
Step 2: Gently and carefully pull crown out to stop second hand
(fig. 2).
Step 3: Turn crown clock-wise or counter clock-wise, moving hour
and minute hands to set the desired time (fig. 3).
Step 4: Push crown in to re-start second hand (fig. 4).
Step 5: Push in and turn crown clock-wise to engage threads.
Continue to turn crown clock-wise to firmly screw/rethread
down. Do not overtighten (fig. 5).
Note: Please screw/rethread down crown (setting knob) to ensure
water resistance and maintain warranty. Do not overtighten.
1
23
45
To Next Page
Loading...
