EasyManua.ls Logo

BESAFE iZi Plus - Rearward-facing Belt Installation; Installation on the Back Seat; Installation on the Front Seat

BESAFE iZi Plus
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 11
1. Whenmountinginthefrontseatofthevehicle,adjusttheback
restofthisvehicleseatinanuprightposition.Whenmounting
inthebackseatofthevehicle,pushthefrontseatofthe
vehicleforwardasmuchaspossible.
2. Installthefrontbracebyslidingthetwopinsintheovaltube
underthefrontsideoftheseat.Movethefrontbraceinwards
withtheratchet.Theratchetisusedtoadjustthefrontbrace
inbothdirections.Slidetheknobs(seeredcircle)onthe
ratchetupordowntochangedirection.(18)
3. Folddowntheoorsupportbeforeyouinstalltheseatinyour
vehicle.(19)
4. Checkiftheoorsupportisfoldedtotallydownwardsas
shownonthegreensignatthetopside.(19)
5. Beforeyoucaninstalltheseatinthevehicle,youhaveto
mount2anchorbeltswhichwillbeconnectedwiththe
connectorsatthebacksideofthechildseat.Theanchorbelts
havetobeconnectedwiththevehicle.
! ItisNOTALLOWEDtomounttheseatinafront
passengerseatWITHANACTIVATEDAIRBAG.
Crucial parts
1. Adjustableheadrest
2. Shoulderstraps(2x)
3. Bodyhugger
4. Harnessbuckle
5. Centraladjuster
6. Reclininglever
7. Frontbrace
8. Beltguidinghook
9. Ratchetforfrontbrace
10. Beltguidinghorns(2x)
11. Floorsupport
12. Heightadjusteroorsupport
13. Floorsupportheightindicator
14. Anchorbelt(2x)
15. Releasehandleheadrest
16. Floorsupportpositionindicator
17. Connectorforanchorbelt(2x)
Rearward-facing belt installation
•Insertthebeltloopthroughthegapbetweentheseatcushion
andtheseatbackonthefrontseatofthevehicle.Thenbringthe
lockingdevicethroughthebeltloopandtighten.(20)
•Ifthesemethodsdonotworkinyourcarreferto
www.besafe.comforalternatives.
Installation on the back seat
•Jointhe2anchorbeltstogethertomakeasinglebelt.Putthe
lockofbelt2throughtheloopofthebelt1andthenthroughthe
loopofbelt2.Pullitrmly.(21)
•Putthemiddlepartoftheanchorbeltovertheinnerpartofthe
vehicleseat.Bringthetwoendsoftheanchorbeltunderthe
frontseatofthevehicleandbringthemupwardstotheseat.
(22)
Installation on the front seat

Related product manuals