BESAFE iZi Plus - Removing the Seat; Positioning the Child; Sleeping Position

14 15
Positioning the childRemoving the seat
1. Positionoftheshoulderstraps:Checkthattheshoulderstrap
slotsareleveledwithororabitunderyourchild’sshoulders.
2. Theheightoftheshoulderstrapsandtheheadrestcanbe
adjustedbyreleasingthereleasehandleatthebackofthe
headrestandpullingtheheadrestupordownwhilekeeping
theheadrestupright.(34)
3. Pulltheshoulderstrapsupwhilepressingthebuttonofthe
centraladjuster.(35)
4. Opentheharnessbuckle.
5. Positiontheshoulderstrapsovertheorangemarkingatsides
oftheseattokeeptheharnessopenwhileyoupositionthe
child.(36)
6. Whenthechildispositioned,placetheshoulderstrapsover
thechild’sshouldersandclosethebuckle:CLICK!(37)
7. Pulltheharnessstrapthroughthecentraladjusterinthe
directionofthegreenarrowstraightup-/forwards.Continue
pullinguntiltheharnessisacomfortablebutrmt.(38)
1. Iftheseatisinstalledinthebackseatofthevehicle,pushthe
frontseatofthevehicleforwardasmuchaspossible.
2. Movethefrontbraceinwardswiththeratchet.
3. Movetheoorsupporttothehighestposition.
4. Releasetheanchorbelts.
5. Removethecarbeltfromthefrontbraceandtheseatbase.
6. Pulltheseatbacktowardsthefront.Turntheseatsoyoucan
easilyremovetheseat.
7. Removetheanchorbeltsfromthevehicle.
!
•Makesurethattheharnessstrapsarealwayslockedand
tightenedwhenthechildisintheseat.
•Removethebabycushion(extraavailableaccessory)whenthe
childisolderthen1year.
•Removethebodyhuggerwhenthechildisolderthen2years.
Sleeping position
•Theseathas3positions.
•Bypullingtherecliningleverupwards,theseatcanbeputin
anotherposition.(39)
•toohigh(32)
•correct(33)