BESAFE IZI UP - Installation in the Car; Approved 3-Point Belt Requirement; Ensure Belt is Not Twisted; Correct Lap Belt Placement

7
1
2
Installation in the the car
Place the iZi Up on the car
seat.
Make sure the iZi Up is
touching the seat back
support.
The Besafe iZi Up can only be used with a 3-point-belt,
approved to UN/ECE regulation No. 16 or other equivalent
standards.
!
Let your child take place in
the iZi Up.
Make sure the belt is not twisted.
!
The lap belt should be worn over the hips.
!