Best Fitness BFE2 User Manual

BFE2
OWNER’S MANUAL
V. BFE2-112718

Best Fitness BFE2 Specifications

General

Type	Elliptical Trainer
Resistance Levels	8
Display	LCD
Heart Rate Monitoring	Yes
Stride Length	18 inches

Summary

Important Safety Information

Safety Guidelines

Before You Begin

Personal Safety During Assembly

Read instructions thoroughly before beginning assembly to ensure safety and proper procedure.

Assembly Instructions

Assembly

Step 1: Upright Frame Assembly

Assemble the upright frame onto the base frame, attaching the wire harness and hardware as shown.

Step 2: Rocker Arm Installation

Install the right and left rocker arms into the swing arms using the specified hardware and end caps.

Step 3: Connecting Rocker Arms

Connect the previously installed rocker arms using the provided M8 Allen bolts and flat washers.

Step 4: Foot Pedal Attachment

Attach the right and left foot pedals to their respective foot tubes using M6x16 Phillips screws.

Step 5: Foot Tube Connection

Connect the assembled foot tubes to the main frame using M10 hex bolts and nuts.

Step 6: Water Holder and Swing Arm Cover

Step 7: Handle Bar Installation

Connect the right and left handle bars to the console frame using M8x16 Allen bolts and M8 arc washers.

Step 8: Console and Power Connection

Connect console frame harness, secure net cover, connect console harnesses, and attach power supply.

Console Overview

Monitoring Your Heart Rate

Target Heart Rate Chart and Calculations