To Next PageTo Next Page
Need help?Do you have a question about the Best Power 0650 SERIES and is the answer not in the manual?
General| Brand | Best Power |
|---|---|
| Model | 0650 SERIES |
| Category | UPS |
| Language | English |
Overview of the UPS manual, including how to install, start, operate, and troubleshoot the Axxium Pro system.
Important notices regarding UPS and battery installation and maintenance, including safety instructions.
Critical safety warnings regarding electrical wiring, battery modules, and external battery cabinets.
Description of the Axxium Pro UPS system, its modular design, and operational modes.
Details on the physical cabinet sizes, components, and external features of the Axxium Pro UPS.
Explanation of the UPS operating modes, including Double Conversion, Battery, and High Efficiency modes.
Description of the alphanumeric display, LEDs, and pushbuttons on the UPS operator control panel.
Information on connecting power to the UPS and load equipment, referencing installation instructions.
Step-by-step instructions for safely starting the Axxium Pro system and avoiding hazards.
Procedure for setting initial configuration parameters like password, language, clock, and output voltage.
Guide to understanding and navigating the UPS front panel display for operation and monitoring.
Explanation of system parameters, their adjustability, and password protection for the Axxium Pro UPS.
Method for changing operating parameters, including password entry and menu navigation.
Instructions for accessing and interpreting the UPS inverter and alarm logs for problem diagnosis.
Illustration of the UPS menu structure for accessing and navigating system parameters.
Procedure for identifying and resolving critical and non-critical alarm messages displayed by the UPS.
Listing and explanation of alarm reason codes to help interpret and isolate alarm causes.
Overview of communication options for monitoring and controlling the Axxium Pro UPS system.
Details on available communication methods including CheckUPS software, RS232, and network adapters.
Explanation of the functions of each pin on the Axxium Pro UPS DB9 serial communication port.
Guidelines for routine maintenance, battery replacement, and power module replacement.
Recommendations for preventive maintenance checks to ensure reliable UPS operation.
Procedure for safely replacing battery modules while the UPS is operating under load ('hot-swapped').
Instructions for removing and installing power modules while the UPS is operating under load ('hot-swapped').
Information on contacting Best Power customer service for assistance with problems or questions.
Technical specifications for the Axxium Pro UPS, including AC output, input voltage, and environment.
Details on the standard warranty terms and conditions for BEST POWER products.
Explanation of the two-year warranty covering compatibility, material, and workmanship defects.
Details of the limited warranty for transient voltage surge suppression circuitry for US and Canadian purchasers.
Instructions for registering the product warranty, either online or by mail/fax.
Frequently asked questions and quick answers for common operational tasks and troubleshooting.
Guidance for preparing the UPS location, including cabinet dimensions and environmental considerations.
Table of overall cabinet dimensions and empty cabinet weights for different Axxium Pro UPS sizes.
Required clearances around the UPS cabinet for servicing and adequate ventilation.
Procedure for installing 3-slot and 6-slot UPS cabinets into standard 19-inch equipment racks.
Information on using the optional floor anchor kit to stabilize UPS or battery cabinets.
Details on using the optional caster cart for mobility of 3-slot and 6-slot UPS cabinets.
Instructions for installing stabilizer brackets to prevent the 12-slot cabinet from falling forward.
Guidance on selecting an optimal location for the UPS and battery cabinets for performance and noise.
Procedure for safely moving UPS and battery cabinets, including removing modules first.
Recommended storage and operating temperature, humidity, and ventilation conditions for UPS and batteries.
Information on installing and using Best Power bypass switches for maintenance and UPS downtime.
Instructions for unpacking the UPS and battery modules and preparing them for setup.
Detailed procedures for installing the UPS and bypass switch, intended for qualified personnel.
Table of required input circuit breaker sizes for hard-wired UPS installations based on capacity.
Information on selecting proper conductor sizes and wiring for external bypass switches.
General overview of UPS installation methods, with or without bypass switches.
Guide to selecting correct wiring diagrams and power module types based on site voltage and bypass configurations.
Instructions for connecting input power to the UPS based on universal or split-phase power modules.
Procedure for making the neutral-to-ground connection required for isolated-output UPS systems.
Step-by-step guide for wiring the UPS and bypass switch, including terminal connections.
Wiring configurations for various UPS output voltages and single/split-phase configurations.
Recommendation to divide loads equally between upper and lower receptacles for non-hard-wired outputs.
Procedure for safely connecting external battery cabinets to the UPS and to each other.
