Bestier D074G - Step 4: Add Support Beams; Step 5: Install Cross Braces; Step 6: Attach Top Supports

05
STEP 6
STEP 5
Attention: Please make sure correct screws
is used in different parts.
Do not tighten the screws in
this step
※ Do not tighten the screws before step 9
finished.
STEP 4
Attention: Please make sure correct screws
is used in different parts.
Do not tighten the screws in
this step
※ Do not tighten the screws before step 9
finished.