To Next PageTo Next Page
Need help?Do you have a question about the Bestop Sport Bar Covers and is the answer not in the manual?
Do not remove seat belts for installation; doing so compromises the manufacturer's warranty.
Product is for appearance and weather shield; not for occupant restraint or impact protection.
Orient fabric over sport bars with zippers underneath. Locate openings for seat belts and speaker pods.
Wrap fabric around sides, tucking under front seat belt casings. Expose clamps for securing seat belt casing.
Drape cover over rear sport bar, fit curve, hook fabric hole around seat belt mount, zip lower and upper portions.
Re-install speaker pods onto new covers. Ensure pre-cut holes align with rods/wiring. Reconnect wiring.
Re-install side and rear bow pivot knuckles onto bracket flanges. Align, snap into place, and secure with screws.
General
