Bestway 58156 - User Manual

Questions and Answers

R
Ricardo MooreAug 1, 2025
Why is my Bestway 58156 Swimming Pool Heater not heating properly?
- M
  Michael LeonardAug 1, 2025
  There are several reasons why your Bestway Swimming Pool Heater might not be heating properly: * The heater itself may not be working. Check the heating light to see if the heater is on. * The heating time may be too long; consider using a Bestway pool cover to help retain heat. * The filter pump might not be a proper match for the pool heater, or the filter pump may have failed, leading to incorrect water flow rates, in this case the filter pump needs to be repaired or replaced. * The pool heater itself may have failed, in which case you should contact after-sales service.
C
christopher86Aug 11, 2025
What to do if the Bestway 58156 Swimming Pool Heater heating light does not work?
- J
  James HaysAug 11, 2025
  If the heating light on your Bestway Swimming Pool Heater isn't working, there could be a few reasons: * There might be a power failure. Check the power source. * If equipped, the RCD plug may have tripped. Try resetting the RCD plug. * The filter pump might not be working. Check to see if water is flowing.
S
Sean JohnsonAug 21, 2025
What to do if Bestway 58156 inlet and outlet valves leak?
- L
  Lisa LopezAug 21, 2025
  If the inlet and outlet valves on your Bestway Swimming Pool Heater are leaking, consider the following: * The hose clamps may be loose. Try tightening them. * The hose O-ring might not be in the correct position, so check whether the O-rings are damaged. * The hose could be broken, so check if the hoses are broken.