Bestway 6942138919028 User Manual (English)

Questions and Answers:

D
Danny JohnsonJul 26, 2025
Why is my Bestway Swimming Pool Heater not heating properly?
- M
  Michelle McbrideJul 26, 2025
  There are several reasons why your Bestway Swimming Pool Heater might not be heating properly: * The heater itself may not be working. Check the LED light to see if the heater is on. * The heating time might be too long. Using a Bestway pool cover is highly recommended. * The filter pump or sand filter may not match the pool heater appropriately, or it may have failed. Replace the filter pump or sand filter, following the specifications in the owner’s manual, and maintain it according to its instructions. * The pool heater setup may have failed. Reset the pool heater according to the instructions. * The thermal cut out may have tripped. Press the “Reset” button on the pool heater. * The pool heater may have failed. In this case, contact after-sales service.
T
Tonya RushAug 4, 2025
What to do if Inlet and Outlet Valves leak in Bestway Swimming Pool Heater?
- P
  Patrick GarciaAug 4, 2025
  If the inlet and outlet valves of your Bestway Swimming Pool Heater are leaking, the following could be the cause: * The hose clamps may be loose. Tighten them. * The hose O-ring may not be in the correct position or may be damaged. Check the O-rings. * The hose may be broken and needs to be replaced.
D
David MurrayAug 14, 2025
Why water does not flow in Bestway Swimming Pool Heater?
- D
  douglas17Aug 15, 2025
  If water isn't flowing through your Bestway Swimming Pool Heater, it could be due to: * A filter pump or sand filter that isn't working. Reset the filter pump or sand filter according to the instructions. * A broken filter pump or sand filter. Check and repair the filter pump or sand filter according to the relevant instructions in its owner’s manual.