To Next PageTo Next PageHow to fix a Bestway FLOWCLEAR 58678 with no LED display?
If the LED indicator isn't displaying anything, first ensure the filter is properly plugged in. Next, check the GFCI plug and press the reset button. If neither of these steps works, the LED indicator may have failed.
Why is the chlorine level low in my Bestway FLOWCLEAR 58678 Swimming Pool Filter?
Several factors can cause low chlorine levels. The filter might not be running long enough, so increase its daily runtime. The salt concentration could be too low (below 2000 ppm); adjust it using the Pool Salt Table. The electrolyzer might be blocked or dirty, requiring disassembly and cleaning. An increase in swimmers or strong sun exposure, which causes chlorine emission, can also lower chlorine levels. Increase the running time, cover the pool when not in use or during operation, and test the water after two days.
What to do if there's flocculent precipitation in my Bestway FLOWCLEAR 58678 Swimming Pool Filter water?
If you notice flocculent precipitation, it may be due to high calcium levels in the pool water. You can resolve this by draining about 20%-25% of the pool water and refilling with clean water to reduce the hardness. If the issue persists, disassemble the electrolytic cell for inspection and cleaning.
General| Type | Sand Filter Pump |
|---|---|
| Voltage | 220-240V |
| Hose Diameter | 32 mm |
| Filter Cartridge Model | Not applicable |
| Suitable for Pool Volume | 1100 - 42300 L |
Verify that all equipment components represent the intended model and check for any damaged or missing parts.
Details the technical specifications of the chlorinator, including production rate, flow range, and operating parameters.
Provides critical advice on salt type, concentration, and pipe placement before installing the chlorinator.
Instructions for cleaning the electrolytic cell, recommending a vinegar solution for optimal performance.
Details the recommended minimum, best, and maximum values for water chemistry parameters.
Guidance on using included test strips to check chlorine, pH, and alkalinity levels daily.
