Bestway Lay-Z-Spa 54138 User Manual

Bestway Lay-Z-Spa 54138

19 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

S-S-003587/21x28.5cm/54138NN 54144NN 欧规SPA说明书/JS-YF-2015-B-04514/封面

S-S-003587

#54138

#54144

#54138, #54144

2060W at 20ºC, IPX5

220-240V~50Hz

www.bestway-global.com

www.bestway-service.com

#54138

#54144

Table of Contents

Other manuals for Bestway Lay-Z-Spa 54138

Questions and Answers:

J
Joshua BrooksAug 20, 2025
Why is my Bestway Lay-Z-Spa 54138 pump not heating properly?
- M
  morrispatriciaAug 20, 2025
  If your Bestway Hot Tub pump isn't heating properly, there are several potential causes. First, ensure the temperature is set high enough. Next, check if the filter cartridge is dirty and needs cleaning or replacement. Also, make sure the water level is correct. You can also try pressing the Reset button on the pump. If none of these steps work, the heating element may have failed, and you should contact your local Bestway Aftersales Service Center for instructions.
K
Katie AllenAug 22, 2025
What to do if Lay-Z-Massage System does not work on Bestway Hot Tub?
- K
  Kevin GarciaAug 22, 2025
  If the Lay-Z-Massage System on your Bestway Hot Tub isn't working, it could be due to the air pump overheating. Unplug the pump and wait two hours for it to cool down, then plug it back in and press the Lay-Z-Massage System Button to reactivate it. Also, if the Lay-Z-Spa Massage stops automatically, press the Lay-Z-Massage System Button to reactivate. If the air pump is broken, contact your local Bestway Aftersales Service Center for instructions.
T
Thomas HornAug 25, 2025
How to fix Bestway Lay-Z-Spa 54138 pump that does not operate?
- D
  Dylan DudleyAug 25, 2025
  If your Bestway Hot Tub pump isn't operating, first, check the power source to ensure it's working. If the test button is pushed, unplug the pump and plug it back in. If the power circuits are broken, contact your local Bestway Aftersales Service Center for instructions.
K
Kimberly CoxAug 26, 2025
How to clean Bestway Hot Tub water?
- L
  Lisa HooverAug 26, 2025
  If the water in your Bestway Hot Tub is not clean, increase filtration time. Check the filter cartridge, and clean or replace it if it’s dirty. Refer to the chemical manufacturer’s instructions for proper water maintenance. If the sanitary system isn’t working, check the power supply or contact your local Bestway Aftersales Service Center for instructions. Also, if the titanium plate is coated, clean it.
D
Daniel White MDAug 27, 2025
What to do if my Bestway Lay-Z-Spa 54138 Hot Tub has a leakage?
- A
  Amanda ClarkAug 27, 2025
  If you notice your Bestway Hot Tub is leaking, and you find a tear or puncture, use the provided repair patch to fix it.
T
Tammy HintonAug 29, 2025
Why are Bestway Hot Tub pump adapters not level?
- S
  Seth RichardsonAug 29, 2025
  If the pump adapters are not level with the spa adapters on your Bestway Hot Tub, elevate the pump with wood or another type of insulated material to bring the pump's adapters level with the spa's adapters. This is normal due to PVC changing shape.
A
Allen WoodsAug 31, 2025
What does it mean if PRCD test failed on Bestway Hot Tub?
- Z
  Zachary GrayAug 31, 2025
  If the PRCD test failed on your Bestway Hot Tub, contact your local Bestway Aftersales Service Center and return the SPA.
D
Diane KleinSep 2, 2025
What to do if my Bestway Spa Accessories pump does not operate?
- S
  Sheila LongSep 2, 2025
  If your Bestway Spa Accessories pump isn't working, first check the power source to ensure it's functioning. If the power source is ok, then the power circuits might be broken.
J
Jenna GonzalezSep 4, 2025
Why is my Bestway Spa Accessories pump not heating properly?
- D
  David WheelerSep 4, 2025
  Several factors can cause your Bestway Spa Accessories pump to not heat properly. The temperature might be set too low, so try increasing it. Also, a dirty filter cartridge can be the culprit, so clean or replace it. Another reason may be that the thermal cut-out cuts off, then you should press the Reset button on the pump.
C
Christopher OlsonSep 6, 2025
What to do if my Bestway Spa Accessories spa pool is leaking?
- D
  David MeltonSep 6, 2025
  If your Bestway Spa Accessories spa pool is leaking, first check for tears or punctures and use the provided repair patch to fix them. Also, the air valve might be loose. To check, cover the air-valve with soapy water to see if air is leaking. If it is, use the provided wrench to tighten the air-valve by first deflating the spa, then holding the backside of the air valve from inside the spa wall and turning the wrench clockwise.

Bestway Lay-Z-Spa 54138 Specifications

General

Brand	Bestway
Model	Lay-Z-Spa 54138
Category	Hot Tub
Language	English

Related product manuals

Preview: Bestway Lay-Z-Spa 54112

Bestway Lay-Z-Spa 54112

Preview: Bestway Lay-Z-Spa 54189

Bestway Lay-Z-Spa 54189

Bestway Lay-Z-Spa 54129

Bestway Lay-Z-Spa 54148

Bestway Lay-Z-Spa 54123

Preview: Bestway Lay-Z-Spa 54154

Bestway Lay-Z-Spa 54154

Preview: Bestway Lay-Z-Spa 54113 Monaco

Bestway Lay-Z-Spa 54113 Monaco

Preview: Bestway LAY-Z-SPA

Bestway LAY-Z-SPA

Bestway LAY-Z-SPA MIAMI

Preview: Bestway Lay-Z-Spa Series

Bestway Lay-Z-Spa Series

Preview: Bestway LAY-Z-SPA S100101

Bestway LAY-Z-SPA S100101

Preview: LAY-Z-SPA BARBADOS AIRJET

LAY-Z-SPA BARBADOS AIRJET