To Next PageTo Next PageWhy is my Bestway Hot Tub pump not heating properly?
If the pump on your Bestway Hot Tub isn't heating properly, make sure the temperature is set high enough. Clean or replace the filter cartridge. If the thermal cut-out has tripped, unplug the pump and let it cool down until the water temperature reaches 35°C (95°F) or lower before restarting. Ensure the spa is covered.
What to do if my Bestway Lay-Z-Spa 54123 Hot Tub has a pool leakage?
If your Bestway Hot Tub is leaking, first check if the spa is torn or punctured and use the provided repair patch if needed. Also, check the air valve for leaks by applying soapy water. If you see bubbles, deflate the spa and use the provided wrench to tighten the air valve. Hold the backside of the air valve from the inner side of the spa wall and turn the wrench clockwise.
How to unlock the control panel on a Bestway Lay-Z-Spa 54123 Hot Tub?
To unlock the control panel on your Bestway Hot Tub, press the button for 3 seconds. If it remains locked, try restarting the pump by unplugging it and plugging it back in. The control panel may have an auto-lock feature that activates after 5 minutes of inactivity, indicated by a lock icon on the LED display.
What to do if Lay-Z-Massage System does not work in Bestway Lay-Z-Spa 54123?
If the Lay-Z-Massage System on your Bestway Hot Tub isn't working, and the air pump might be overheating, unplug the pump and wait two hours for it to cool down. Then, plug it back in and press the Lay-Z-Massage System button. If the massage system stops automatically, press the Lay-Z-Massage System Button to reactivate it.
What to do if water leaks from the adapters between the pump and spa in Bestway Lay-Z-Spa 54123?
To address water leaks from the adapters between the pump and spa of your Bestway Hot Tub, first, insert the stopper caps onto the spa’s ports to prevent water from escaping and disconnect the pump. Then check and ensure the seals are correctly placed inside the pump adapters. If the seals are correctly in place, reconnect the pump to the spa and hand-tighten the adapters.
How to level pump adapters with spa adapters on Bestway Lay-Z-Spa 54123 Hot Tub?
Elevate the pump of your Bestway Hot Tub with wood or another type of insulated material to bring the pump's adapters level with the spa's adapters.
How to fix a Bestway Lay-Z-Spa 54123 pump that does not operate?
If the Bestway Hot Tub pump does not operate, check the power source first. If the power source is fine, unplug the pump and plug it back in. If the issue persists, it could be due to broken power circuits.
What to do if Lay-Z-Massage System does not work on Bestway Lay-Z-Spa 54123 Hot Tub?
If the Lay-Z-Massage System on your Bestway Hot Tub isn't working, the air pump might be too hot. Unplug the pump and wait for two hours to allow it to cool down. Then, plug it back in and press the Lay-Z-Massage System Button to reactivate. If the massage system stops automatically, press the Lay-Z-Massage System Button to reactivate it.
How to level pump adapters on Bestway Lay-Z-Spa 54123 Hot Tub?
If the pump adapters are not level with the spa adapters on your Bestway Hot Tub, elevate the pump with wood or another type of insulated material to bring the pump's adapters level with the spa's adapters.
General| Brand | Bestway |
|---|---|
| Model | Lay-Z-Spa 54123 |
| Type | Inflatable Hot Tub |
| Digital Control Panel | Yes |
| Max. Heat Capability | 104°F |
| Cover | Insulated cover |
| Cable Length | 5m |
Essential safety rules for spa operation to prevent hazards.
Critical warnings concerning electrical connections, grounding, and usage near water.
Guidelines to minimize risks of drowning, hyperthermia, and physical harm.
Guidance on choosing a suitable and safe location for spa installation.
Instructions for testing the Protective Earth Leakage Circuit Breaker for safety.
Procedure for resetting the heating system if temperature doesn't change.
Key operational guidelines for the heating and safety systems.
Detailed explanation of each button and LED on the control panel.
List of common alarm codes and their corresponding causes and solutions.
Table listing common issues, probable causes, and their respective solutions.
