Bestway Lay-Z-Spa MILAN AIRJET PLUS User Manual (English)

Questions and Answers:

L
Lawrence TaylorAug 4, 2025
Why is my Bestway Lay-Z-Spa MILAN AIRJET PLUS Hot Tub pump not heating properly?
- M
  megan11Aug 4, 2025
  If your Bestway Hot Tub pump isn't heating properly, there are several things you can check. First, make sure the temperature is set high enough. Next, inspect the filter cartridge and clean or replace it if it's dirty. Also, make sure the spa is covered to retain heat. If the thermal cut-out has tripped, unplug the pump and let it cool down until the water temperature reaches 35°C (95°F) or lower before restarting it.
M
Mike GrossAug 9, 2025
Why Lay-Z-Massage System does not work in Bestway Hot Tub?
- A
  agambleAug 9, 2025
  If the Lay-Z-Massage System on your Bestway Hot Tub isn't working, unplug the pump and wait two hours for it to cool down. Then, plug it back in and press the Lay-Z-Massage System button to reactivate it. If the massage stops automatically, press the Lay-Z-Massage System Button to reactivate.
C
Casey DanielAug 14, 2025
How to unlock Bestway Lay-Z-Spa MILAN AIRJET PLUS Hot Tub control panel?
- S
  Seth FieldsAug 14, 2025
  To unlock the Bestway Hot Tub control panel, press the button for 3 seconds. If it's still not working, try restarting the pump by unplugging it and plugging it back in. This issue may occur because the control panel has an auto-lock feature that activates after 5 minutes of inactivity.
H
hernandezsharonAug 25, 2025
How to clean water in Bestway Lay-Z-Spa MILAN AIRJET PLUS?
- C
  Courtney WilsonAug 25, 2025
  If the water in your Bestway Hot Tub isn't clean, increase the filtration time. Also, clean or replace the filter cartridge. Make sure you follow the chemical manufacturer’s instructions for proper water maintenance.
R
Robert MorenoAug 29, 2025
How to level Bestway Hot Tub pump adapters?
- K
  Kirsten ValdezAug 29, 2025
  Elevate the pump with wood or another type of insulated material to bring the pump's adapters level with the spa's adapters. This is because one characteristic of PVC is that it changes shape, which is normal.
L
Linda LeeSep 10, 2025
What to do if Bestway Lay-Z-Spa MILAN AIRJET PLUS has a pool leakage?
- S
  Samantha HannaSep 12, 2025
  If your Bestway Hot Tub has a pool leakage, use the provided repair patch if the spa is torn or punctured. If the air valve is loose, deflate the spa, hold the backside of the air valve from the inner side of the spa wall with one hand, and turn the wrench clockwise.

Bestway Lay-Z-Spa MILAN AIRJET PLUS Specifications

General

Brand	Bestway
Model	Lay-Z-Spa MILAN AIRJET PLUS
Category	Hot Tub
Capacity	4-6 people
Heating System	Rapid Heating System
Max. Heat Capability	40 °C
Power Consumption	2050 W
Control Panel	Digital Control Panel
Pump	Integrated Pump
Heating Rate	1.5-2 °C/h
Included Accessories	filter cartridge, chemical floater, repair patch
Inflated Size	196 x 196 x 71 cm
Power	220-240V~50Hz, 2050W at 20℃