Need help?Do you have a question about the Bestway Lay-Z-Spa Hollywood AirJet and is the answer not in the manual?
General| Brand | Bestway |
|---|---|
| Model | Lay-Z-Spa Hollywood AirJet |
| Type | Inflatable Hot Tub |
| Capacity | 4-6 people |
| Heating System | Rapid Heating System |
| AirJet System | Yes |
| Number of Jets | 140 |
| Digital Control Panel | Yes |
| Included Pump | Yes |
| Insulated Cover | Yes |
| ChemConnect Dispenser | Yes |
| Inner Size | 57 in. |
| Actual Water Flow | 1, 325 L/h (350 gal/h) |
| Max. Heat Capability | 40°C (104°F) |
| Material | TriTech™ Material |
| Inflation Time | Around 5 minutes |
| Power Supply | 220-240V ~ 50Hz |
Examine equipment before use and notify customer service of any damaged or missing parts.
Guidance for setting up the spa during winter to prevent damage and extend product life.
Controls the pump's auto-lock feature for security and preventing accidental activation.
Allows setting heating cycle time and duration to save power and enjoy spa at desired times.
Activates the heating system; indicator light shows heating status.
Activates the massage system with a 30-minute auto-shutoff feature.
Adjusts the spa water temperature, with default settings and range specified.
Activates or deactivates the control panel buttons and all currently activated functions.
Allows switching the temperature display between Celsius and Fahrenheit.
Turns the filter pump on and off; indicator light shows filter status.
Guidance on using the spa during winter and the function of the Freeze Shield™ system.
Instructions on how to add air to the spa to maintain correct pressure due to temperature changes.
Procedure for cleaning the spa cover periodically for hygiene and disinfection.
Steps to check and clean filter cartridges daily to ensure clean spa water.
Guidance on maintaining water quality, cleaning, and chemical balance for spa hygiene.
Step-by-step instructions for safely draining the spa water before disassembly.
Specific instructions for disassembly relevant only to Drop stitch spa models.
Troubleshooting steps for when the spa pump fails to turn on.
Diagnosing and resolving issues where the spa pump is not heating correctly.
Steps to address problems with the Lay-Z-Massage system not functioning.
Identifying and fixing issues related to leaks in the spa pool.
Solutions for maintaining clean spa water, including filtering and maintenance.
Troubleshooting steps for a non-responsive or locked control panel.
Troubleshooting steps for when the water flow sensors do not detect water flow.
Diagnosing issues when the pump's thermometer reads water temperature below 4°C (40°F).
Resolving errors where the pump's thermometer reads water temperature over 50°C (122°F).
Troubleshooting pump thermometer connection issues.
Addressing problems with the manual reset thermal cut-out.
Solutions for ground connection failures or pump problems.
To Next Page