Bestway Lay-Z-Spa Hawaii HydroJet Pro User Manual (English)

Other manuals for Bestway Lay-Z-Spa Hawaii HydroJet Pro

Questions and Answers:

H
Hannah GarciaJul 25, 2025
Why is my Bestway Hot Tub not heating up?
- C
  Cody HutchinsonJul 25, 2025
  If your Bestway Hot Tub pump isn't heating properly, there are several possible causes: * The temperature might be set too low. Adjust it to a higher setting. * The filter cartridge could be dirty. Clean or replace it. * The thermal cut-out may have activated. Unplug the pump and let it cool down until the water temperature reaches 35°C (95°F) or lower before restarting. * The spa might not be covered. Attach the cover to retain heat.
C
Carolyn ValdezJul 30, 2025
Why is my Bestway Hot Tub HydroJet not working?
- K
  Kelly DawsonJul 30, 2025
  If the HydroJet™ system button is on but water does not come out of the spa, power off the Bestway Hot Tub heater for about 3 hours, wait for the temperature to drop, and restart the HydroJet function. The HydroJet system shuts off automatically after 1 hour, so restart the HydroJet function again to enjoy your spa. If there is some air trapped in the hoses, disconnect the water pump and reconnect after draining some water.
M
Michael YoungAug 4, 2025
Why is Bestway Lay-Z-Spa Hawaii HydroJet Pro Lay-Z-Massage not working?
- C
  Charlotte AriasAug 4, 2025
  If the Lay-Z-Massage System on your Bestway Hot Tub isn't working, the air pump might be overheating. Unplug the pump and wait two hours until it cools down, then plug it back in and press the Lay-Z-Massage System Button. Also, the Lay-Z-Spa Massage stops automatically, so press the Lay-Z-Massage System Button to reactivate it.
U
uhaleAug 9, 2025
How to unlock Bestway Hot Tub control panel?
- E
  Emily MarshallAug 10, 2025
  If your Bestway Hot Tub control panel is not working, it might be locked. An auto-lock feature activates after 5 minutes of inactivity, indicated by a highlighted lock icon on the LED display. To unlock it, press the button for 3 seconds. If it still doesn't unlock, try restarting the pump by unplugging it and plugging it back in.
G
Gail HigginsAug 14, 2025
What to do if Bestway Lay-Z-Spa Hawaii HydroJet Pro is leaking from pump?
- K
  Katherine LeeAug 14, 2025
  If water is leaking from the adapters between the pump and spa of your Bestway Hot Tub, follow these steps: 1. Insert the stopper caps on the spa ports to prevent water from escaping and disconnect the pump. 2. Check if the seals are in place. 3. If the seals are not in the correct position, open the gears, and place the seals in correct position. 4. Connect the pump to the spa, hand-tighten the adapters, and remove the stopper caps from the spa ports. If there is leakage, tighten the adapter until there is no leakage.
D
donald78Aug 19, 2025
How to level Bestway Lay-Z-Spa Hawaii HydroJet Pro Hot Tub pump adapters?
- L
  Lisa DominguezAug 20, 2025
  Elevate the pump of your Bestway Hot Tub with wood or another type of insulated material to bring the pump's adapters level with the spa's adapters. This is because one characteristic of PVC is that it changes shape, which is normal.

Bestway Lay-Z-Spa Hawaii HydroJet Pro Specifications

General

Brand	Bestway
Model	Lay-Z-Spa Hawaii HydroJet Pro
Category	Hot Tub
Capacity	4-6 people
Heating System	Rapid Heating System
HydroJet System	Yes
Jet Nozzles	8
AirJet System	Yes
Control Panel	Digital
Chemicals Dispenser	Yes
Material	PVC
Temperature Range	20-40°C
Max Water Temperature	40°C
Heating Rate	1.5-2°C/h
Inflatable Material	TriTech™
Power Consumption	2050W
Actual Water Flow	1, 325 L/h (350 Gal./h)
Pump Flow Rate	1, 325 L/h (350 Gal./h)
Filter Cartridge	VI
Water Capacity	210 gallons (795 liters)
Dimensions	71 x 71 x 26 inches (180 x 180 x 66 cm)
Weight	34 kg (75 lbs)