To Next PageTo Next Page
Need help?Do you have a question about the Beta Marine Beta 10 and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Power Output | 10 hp |
| Cylinders | 2 |
| Cooling System | Heat exchanger |
| Rated Speed | 3600 rpm |
| Fuel System | Indirect injection |
| Maximum Output | 10 hp (7.4 kW) |
| Fuel Consumption | 1.5 L/h at maximum power |
Information on identifying engine via WOC number and serial number.
Guarding rotating parts and shafts to prevent injury.
Precautions for fuel lines, connections, and hot exhaust gases.
Details on cylinder, bore, stroke, power output, and torque.
Steps for achieving correct angular alignment between engine and shaft.
Steps for achieving correct parallel alignment between engine and shaft.
Guidance on preventing hydraulic lock in wet exhaust systems.
Details on fuel tank, filter, pump, and leak-off connections.
Critical safety advice for fuel system installation and maintenance.
Importance of cable size for minimizing voltage drop to the starter.
Essential checks before initial start-up and bleeding the fuel system.
How to stop the engine using the stop solenoid.
Tasks for 150, 250, and 750-hour service intervals.
Recommended API classification and SAE viscosity grades for engine oil.
Correct procedure for checking and topping up engine oil.
Step-by-step guide for draining and refilling engine oil.
Steps for replacing the spin-on fuel filter.
Procedure for checking and replacing the sea water pump impeller.
How to check belt tension by measuring depression.
Protecting the engine cooling and fuel systems for winter.
Solutions for when the engine won't start or cranks slowly.
