EasyManua.ls Logo

Beta Marine Beta 14 User Manual

Beta Marine Beta 14
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Heat Exchanger
& Keel Cooled
Small Diesel Engine Range: Beta 10,
Beta 14, Beta 16, Beta 20 & Beta 25
Heat Exchanger
& Keel Cooled
Small Diesel Engine Range: Beta 10,
Beta 14, Beta 16, Beta 20 & Beta 25
Operator’s
Maintenance
Manual
Operator’s
Main
tenance
Manual
CALIFORNIA - Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the state of
California to cause cancer, birth defects and other reproductive harm.
1590_March_2014.qxd:beta 1660 manual 19/3/14 10:24 Page 1

Other manuals for Beta Marine Beta 14

Question and Answer IconNeed help?

Do you have a question about the Beta Marine Beta 14 and is the answer not in the manual?

Beta Marine Beta 14 Specifications

General IconGeneral
BrandBeta Marine
ModelBeta 14
CategoryEngine
LanguageEnglish

Summary

ENGINE IDENTIFICATION

Engine Serial Number

Locates the engine's unique serial number for identification.

Safety Precautions!

Drives - Power Take Off Areas

Warnings about exposed moving parts and potential injury hazards.

Exhaust Outlet

Precautions regarding high exhaust temperatures and fumes.

Fuel & Oil Safety

Safety advice concerning high-pressure fuel lines, leaks, and oil handling.

Technical Specifications

Section 1 INSTALLATION RECOMMENDATIONS

VENTILATION

Requirements for engine compartment air supply and cooling.

ENGINE MOUNTING

Guidelines for vibration-free engine installation and alignment.

ALIGNMENT

Procedures for ensuring correct engine and shaft alignment.

EXHAUST SYSTEMS

Guidelines for installing and configuring exhaust systems.

SEA WATER INLET FOR HEAT EXCHANGER COOLED ENGINES

Requirements for sea water inlet strainers and hose sizes.

FUEL SUPPLY & LEAK OFF

Installation of fuel system components and leak-off pipe routing.

ELECTRICAL INSTALLATIONS

CONTROL PANELS

Fitting and protection of control panels and wiring.

BATTERY INSTALLATIONS - SOME CONSIDERATIONS

Recommendations for dedicated starter and domestic batteries.

BATTERY CABLES

Sizing and installation of battery cables to minimize voltage drop.

Section 2 GUIDELINES FOR OPERATION OF ENGINE

CHECKS PRIOR TO INITIAL USE

Essential checks before starting a new engine for the first time.

NORMAL STARTING

Procedures for starting the engine with various control panel types.

STOPPING

Procedures for stopping the engine using the stop solenoid or mechanical lever.

Section 3 MAINTENANCE SCHEDULE

DAILY OR EVERY 8 HOURS RUNNING

Routine checks performed daily or every 8 hours of operation.

INITIAL MAINTENANCE INTERVALS

First 25 and 50 hour maintenance tasks.

LUBRICATING OILS

FUEL SYSTEM

FILLING THE FRESH WATER SYSTEM

SEA WATER PUMP AND COOLING SYSTEM

WINTERISING AND LAYING UP

Trouble Shooting

Engine Overheating Issues

General and specific troubleshooting for engine overheating.

ELECTRICAL FAULT FINDING (ENGINES AFTER JULY 2005 ONLY)

Spanner Torque Settings

Emission Durability

Quick Reference Parts List

Related product manuals