To Next PageTo Next PageHow to fix a Beta Motorcycles RR 125 2T EUROPA 2020 engine that misfires?
If your Beta Motorcycles Motorcycle engine misfires, it might be because the spark gap is wrongly adjusted, so restore the spark gap. Another cause could be a dirty spark plug, so clean or replace the spark plug.
What causes a Beta Motorcycles Motorcycle engine not to hold idling?
If the engine of your Beta Motorcycles Motorcycle does not hold idling, it could be due to several reasons: * The idling air jet might be clogged, so contact authorised BETAMOTOR customer service. * The adjustment screws might be poorly adjusted, so adjust them. * The spark plug might be faulty, so replace it. * There might be a faulty ignition system, so check the coil and the spark plug cap.
What does it mean if the “MIL” light is on in my Beta Motorcycles RR 125 2T EUROPA 2020?
If the telltale “MIL” lights on your Beta Motorcycles Motorcycle engine starts, it indicates an engine management system fault. In this case, contact authorised BETAMOTOR customer service.
What does “High Voltage” on my Beta Motorcycles RR 125 2T EUROPA 2020 instrument mean?
If “High Voltage” appears on the instrument of your Beta Motorcycles Motorcycle, it indicates overcharging. Turn off the engine and contact authorised BETAMOTOR customer service.
Why is my Beta Motorcycles RR 125 2T EUROPA 2020 producing excessive smoke?
If your Beta Motorcycles Motorcycle is producing excessive smoke, it may indicate a possible mixer system fault. Contact authorised BETAMOTOR customer service.
General| Displacement | 124.8 cc |
|---|---|
| Ignition | Electronic CDI |
| Transmission | 6-speed |
| Clutch | Wet multi-disc |
| Final Drive | Chain |
| Front Tire | 90/90-21 |
| Rear Tire | 120/90-18 |
| Ground Clearance | 320 mm |
| Engine Type | Single cylinder, 2-stroke |
| Bore x Stroke | 54 mm x 54.5 mm |
| Fuel System | Carburetor |
| Lubrication | Premix |
| Cooling System | Liquid cooled |
| Starting System | Kick start |
| Frame | Double cradle steel |
| Rear Suspension | Monoshock |
| Front Brake | Single disc, 260 mm |
| Rear Brake | Single disc |
| Fuel Tank Capacity | 9.5 l |
Frame and engine identification data stamped on vehicle.
Standard items supplied: manual, tool kit, and cable adapter for scantool.
Identification of main motorcycle parts with diagrams and labels.
Technical data including weight, dimensions, and tyre specifications.
Fluid capacities for engine, gearbox, coolant, and suspension settings.
Description of the front brake system, disc, and caliper type.
Description of the rear brake system, disc, and caliper type.
Engine specifications: bore, stroke, displacement, compression, and fuel consumption.
Specifications for spark plugs used in different models.
Description of the clutch type (wet, multidisc).
Gear ratios for all gears and final drive specifications.
Information on the exhaust valve operation.
Details on the ignition system type.
Methods for starting the engine (kick-starter, electric starter).
Overview of the motorcycle's electrical system and wiring diagrams.
Specification of bulb types for lighting components.
Fuse specification and quantity.
Table listing recommended lubricants and liquids for maintenance.
Identification and function of key parts: fuel tank cap and fuel cock.
Location and operation of the starter lever and choke.
Location of the mixer oil tank cap for specific models.
Location and function of the clutch lever on the handlebars.
Operation of left-hand handlebar switches: horn, lights, and turn signals.
Operation of right-hand switch to turn off the engine.
Operation of right-hand switches for starter and engine shut-down.
Location of front brake lever and throttle control on handlebar.
Location and operation of the gear change lever.
Location and operation of the rear brake pedal.
Operation of the kickstart for specific models.
Procedure for deploying and securing the side stand.
Information about the supplied keys.
Procedure for activating and deactivating the steering lock.
Explanation of dashboard functions, indicators, and buttons.
Identification and meaning of various dashboard warning lights.
Procedure for replacing the internal battery of the meter.
Detailed steps for using Adjust button to navigate dashboard functions.
Detailed steps for using Select button to navigate dashboard functions.
Instructions for entering and navigating dashboard setting modes.
Procedure for setting the hour on the dashboard clock.
Procedure for setting the minute on the dashboard clock.
Procedure for setting up the stopwatch distance.
Instructions for setting the maintenance light mileage.
Procedure for adjusting dashboard backlight brightness.
Procedure for setting the odometer value.
Routine checks to ensure safe driving and vehicle longevity.
Procedure and recommendations for engine's initial running-in period.
Instructions and safety precautions for refueling the vehicle.
Procedure for refuelling oil mixer tank on specific models.
Detailed steps for starting engine via electric or kick-starter.
Procedure for safely shutting down the engine.
Explanation of symbols used in the adjustments section.
Procedures for adjusting front and rear brakes.
Adjustment procedure for the clutch lever.
How to adjust the throttle control cable play.
Procedure for adjusting the engine idle speed.
Tables for adjusting carburetor settings based on altitude and temperature.
Note regarding adjustment of the exhaust valve control.
Procedure for adjusting handlebar position via U-bolt.
Adjustments for fork rebound damper, spring preload, and compression damper.
Suggestions for suspension adjustment based on riding conditions and rider weight.
Adjustment of the shock absorber's rebound damper.
Adjusting hydraulic compression damper for different speed impacts.
Procedure for adjusting spring preload on the shock absorber.
Method to verify static sag of the shock absorber.
Table showing spring constants based on rider weight.
Procedure for checking and replacing engine oil.
Procedure for checking and replacing liquid coolant.
Procedure for removing, installing, and cleaning air filter.
Procedure for checking and replacing spark plug.
Procedure for draining float chamber and checking float level.
Checking and restoring front brake fluid, bleeding, lining, and disc thickness.
Checking and restoring rear brake fluid, bleeding, lining, and disc thickness.
Checking and bleeding the clutch fluid.
Procedure to check and adjust steering play.
Maintenance and tightening torques for the fork.
Tightening procedure for the front wheel.
Recommendations for tyre usage, pressure, and maintenance.
Periodically checking tightness of rear suspension linkage nuts and bolts.
Procedure for checking, adjusting, and checking chain wear.
Maintenance of headlight glass and beam angle.
Maintenance of the LED tail light.
Battery location, maintenance, removal, and assembly.
Procedure for accessing and replacing fuses.
General precautions and procedures for cleaning the motorcycle.
Operations to perform before and after long periods of inactivity.
Schedule of maintenance tasks based on running hours or coupons.
Summary of tightening torques for various components.
Step-by-step guide to remove and install the motorcycle saddle.
Procedure to remove and install the air filter side panel.
Steps for removing and installing the complete fuel tank.
Procedure to remove and install the headlamp mask.
Table of common problems, their causes, and recommended remedies.
