Beta Motorcycles Xtrainer 300 2T 2020

Questions and Answers

A
andrewmaddenAug 12, 2025
Why won't my Beta Motorcycles Xtrainer 300 2T 2020 start?
- T
  Teresa PorterAug 12, 2025
  Several issues could prevent your Beta Motorcycles Motorcycle from starting. It could be due to a dirty air filter, a flooded engine, excessive distance between the electrodes, slackened or oxidized ignition connector or coil, or water in the carburettor. Try cleaning or replacing the spark plug, operating the electrical starter push button 2 times for 5 seconds (if the vehicle does not start, remove and dry the spark plug), checking the distance between the electrodes, cleaning the ignition connector or coil with a spray product for electric contacts and tightening it, or emptying the carburettor tank.
K
Katherine LawrenceAug 19, 2025
What to do if my Beta Motorcycles Xtrainer 300 2T 2020 engine misfires?
- J
  Jeremy DrakeAug 20, 2025
  If your Beta Motorcycles Motorcycle engine is misfiring, it might be due to a wrongly adjusted spark gap or a dirty spark plug. Try restoring the spark gap or cleaning/replacing the spark plug.
H
Heather RileyAug 27, 2025
How to fix a Beta Motorcycles Motorcycle when the engine does not hold idling?
- B
  Beverly LiAug 27, 2025
  If the engine of your Beta Motorcycles Motorcycle won't hold idling, the adjustment screws may be poorly adjusted, the spark plug could be faulty, or there might be a faulty ignition system. Try adjusting the screws, replacing the spark plug, or checking the coil and the spark plug cap.
J
jonesmallorySep 3, 2025
What does it mean if the 'MIL' light is on after starting my Beta Motorcycles Motorcycle?
- B
  Brandon WilsonSep 3, 2025
  If the 'MIL' light illuminates after starting your Beta Motorcycles Motorcycle, it indicates an engine management system fault. Empty the fuel tank and refuel with mixture at 1.6%.